Let's see your Kubota

[goeduck]

Lots of shiny machines.

This is my machine. Everything on it I've either built or rebuilt. It's not done but it's come a long way. I've learned a lot making it happen. Probably spent more on it than if I bought new, too.

And my ZD21 60" zero turn. Got it with a bad hydro, rebuilt it and runs like a charm.

Very nice work! Good Job!

 

[Beaux Duke]

Lots of shiny machines.

This is my machine. Everything on it I've either built or rebuilt. It's not done but it's come a long way. I've learned a lot making it happen. Probably spent more on it than if I bought new, too.

Reminds me of a bumper sticker I saw on a hot rod at Cruisin the Coast in Biloxi, Ms this year
- Built, not bought -

Good job! A great example of working with what you have and making it better.

 

[bdhsfz6]

MX5800 HST+ with LA1065 FEL and BH92 backhoe.



L6060 HST with LA1055 FEL, Landpride STB1596 plow and Fressori ash spreader.



Formerly L3430 HST with LA765 FEL and BH90 backhoe.

 

[Steppenwolfe]

View attachment 531624

My MX 5100 and my faithful Beagle, Charlotte...

 

[fatjay]

Reminds me of a bumper sticker I saw on a hot rod at Cruisin the Coast in Biloxi, Ms this year
- Built, not bought -

Good job! A great example of working with what you have and making it better.

I like that a lot. Ordering one off amazon as we speak!

 

[TMGT]

My B2620 helping clear the land for my new workshop, mostly hauling off the trees and brush I knocked down, also took care of a lot of the finish grading.

 

[oldballs]

My B2620 and just some of attachments....... I could go on and on I am so pleased with the dependability and usefulness of this model and it has about 700 hours to date.
Cheers,
Mike

 

[Soldier415]

L3430HSTC with LP RB3784 blade attached

Just got done blowing some snow today. The heat was nice

 

[BX23S-1]

L3430HSTC with LP RB3784 blade attached

Just got done blowing some snow today. The heat was nice

I hate youuuuuuuuu, you have a nice warm cab to go out and play in the snow

 

[dragoneggs]

I hate youuuuuuuuu, you have a nice warm cab to go out and play in the snow

Yeah something is wrong if you have to go out of your shop and into your tractor to warm up. Problem is I don't have a cab on my tractor or heat in my shop.

 

[BX23S-1]

Yeah something is wrong if you have to go out of your shop and into your tractor to warm up. Problem is I don't have a cab on my tractor or heat in my shop.

LOL... you would think we`d get use to it by now, ....well, until somebody shows off that fancy warm cab a little bit
I`m finally lucky this year... my wife had a brand new garage built... tossed me the keys and said merry christmas.
I hate it when she does that... now i`m shopping around for some sort of garage heater... maybe a cab soon.

 

[oldballs]

Yeah something is wrong if you have to go out of your shop and into your tractor to warm up. Problem is I don't have a cab on my tractor or heat in my shop.

Yeah, me neither darn it. Nice rig Soldier

 

[Soldier415]

I hate youuuuuuuuu, you have a nice warm cab to go out and play in the snow

Yeah, me neither darn it. Nice rig Soldier

Thanks

Its definitely nice to fire it up, go in and have a coffee, then come out to a warm cab to tackle snow. Especially when the wind shifts while blowing snow.

We ended up getting a total of 8 inches. Had to cut enough of a path to get out this morning, then cleaned up the dooryard.

Still have to go out later today and clear back the banks and a turnout

 

[bguillory]

New to me L2800, 2007 model with only 32 hrs when I got it! Like new condition except sun faded from being outside, and looks like the guy did some painting around it, got paint drips on it.

 

[Peter 315]

My l3800

 

[Herkypilot]

M7060 HDC12 13 hrs. Bought new Dec 2016. Been too busy to really get more hrs on it. Great machine though




L3540 290 hours. Bought with 220 hrs in 2014. Great workhorse



HP

 

[BX23S-1]

Thanks

Its definitely nice to fire it up, go in and have a coffee, then come out to a warm cab to tackle snow. Especially when the wind shifts while blowing snow.

We ended up getting a total of 8 inches. Had to cut enough of a path to get out this morning, then cleaned up the dooryard.

Still have to go out later today and clear back the banks and a turnout

Ohhhhhhhhhh rub it in why don`t yah.... LOL
Cuddo`s to ya soldier, i hope to have a nice cab soon.

Be Safe out there...!

 

[goeduck]

M7060 HDC12 13 hrs. Bought new Dec 2016. Been too busy to really get more hrs on it. Great machine though.

L3540 290 hours. Bought with 220 hrs in 2014. Great workhorse

HP

Nice looking machines!

 

[goeduck]

New to me L2800, 2007 model with only 32 hrs when I got it! Like new condition except sun faded from being outside, and looks like the guy did some painting around it, got paint drips on it.

Very low hours, good find!

 

[dragoneggs]

New to me L2800, 2007 model with only 32 hrs when I got it! Like new condition except sun faded from being outside, and looks like the guy did some painting around it, got paint drips on it.View attachment 531868View attachment 531869

Very low hours, good find!

Low hours... that is an understatement! 3hr/year! I hope you can find time to put a whole bunch more than that on it!