sixdogs
Super Star Member
- Joined
- Dec 8, 2007
- Messages
- 13,248
- Location
- Ohio
- Tractor
- Kubota M7040, Kubota MX5100, Deere 790 TLB, Farmall Super C
I have a Lincoln SP-180T wire feed @220 and have used with .035 flux core wire for farm equipment outside. Having become more proficient, I'm ready to graduate to MIG inside and set up for 75/25 argon. I weld all-around things in the 1/16" - 3/16" range as well as some smaller but thicker things.
Question is, should I generally use .025 or .030 wire, doesn't it matter much or should I keep both on hand?
Question is, should I generally use .025 or .030 wire, doesn't it matter much or should I keep both on hand?