Little help figuring out how to "bell" my piers.

   / Little help figuring out how to "bell" my piers. #11  
Exactly. It makes it harder to lift. and harder to sink.



except code here is 16' hole with a 36" bell. :confused2:


Now how the **** do you do that.:confused:

Hopefully not a 16 (foot deep hole) with a 36" bell. That would take one heck of a lot of extensions on an auger......

Be more like a dug well......:laughing:

Depending on depth, it would be possible but if it's to below frost line, at least here it's 48", would be about impossible.

We crumb out to where it 'looks' belled.

While it's code here, I've never seen an inspector peering in a hole, ever.
 
   / Little help figuring out how to "bell" my piers. #12  
At almost a yard of concrete a piece that's flipping nuts.
let alone $$$$$$ :confused2:

I hear that, but it's what the county is requiring. :(
 
   / Little help figuring out how to "bell" my piers. #14  
I'd say that all depends on what the pier's are supporting.

2 story log home for me - that's a lot of weight!
 
   / Little help figuring out how to "bell" my piers.
  • Thread Starter
#16  
Hopefully not a 16 (foot deep hole) with a 36" bell. That would take one heck of a lot of extensions on an auger......

Be more like a dug well......:laughing:

Depending on depth, it would be possible but if it's to below frost line, at least here it's 48", would be about impossible.

We crumb out to where it 'looks' belled.

While it's code here, I've never seen an inspector peering in a hole, ever.


lol sorry. 16" wide 36" deep with a 36" bell is what the county code reads for a "pole" barn. but even as I type that is sounds unreasonable.



but that's what the want. :laughing:
 
   / Little help figuring out how to "bell" my piers.
  • Thread Starter
#17  
2 story log home for me - that's a lot of weight!

For a home I can see.



I thought you were talking about a random pole barn :confused2:
 
   / Little help figuring out how to "bell" my piers. #18  
form_with_bell_footing_400x300.jpg


cedar3A_390x479.jpg




North America's #1 selling footing forms - Bigfoot saves time, money on house repairs with concrete footing forms & pier footings

buy an extra one to use for a funnel to guide cement in.

tom
 
   / Little help figuring out how to "bell" my piers. #19  
Exactly. It makes it harder to lift. and harder to sink.



except code here is 16' hole with a 36" bell. :confused2:


Now how the **** do you do that.:confused:

36" seems pretty unreasonable. Takes a dang big shed to need it that big.

Here we don't fill the entire hole with crete, just the bottom thus making a "bell". Most don't even do that much. They just set the post on a cookie.
 
   / Little help figuring out how to "bell" my piers. #20  
I can see them being useful in sand, but have my doubts as to how effective they are when you just compact the soild around them after digging out a hole big enough to pout the form into there, then backfilling and compacting. Years after the soils is backfilled, it's still a sponge and where all the water goes.

Eddie
 

Tractor & Equipment Auctions

2006 Ford Expedition 4x4 SUV (A50324)
2006 Ford...
Unused 2025 CFG Industrial QNT50R Mini Excavator (A50322)
Unused 2025 CFG...
2015 KUBOTA 1140CPX RTV (A51406)
2015 KUBOTA...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A52748)
80in HD Tooth...
AIRMAN POS100S PORTABLE AIR COMPRESSOR (A52472)
AIRMAN POS100S...
2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
 
Top