RichZ
Veteran Member
- Joined
- Apr 4, 2001
- Messages
- 1,858
- Tractor
- Kubota 4630 with cab and loader
Live Hydraulics vs Independent PTO
- Thread starter dourobob
- Start date
- Views: 7699
OP
dourobob
Platinum Member
- Joined
- Mar 27, 2002
- Messages
- 670
- Tractor
- Wheel Horse 522xi
Hi Rich
A fine looking piece of machinery. I actually have a Zane Thang on my little Fergie and, after a bit of adjustment I am really pleased with how it works. The Live Thang is something different which, if I understand the messages on YTMAG, will allow the PTO to be shut off but still let the Hydraulics lift the 3pt - as one person described it I can drive down the road with my Bush Hog attached, have my Hydraulics on so the BH doesn't slump down, and not have the blade spinning. Apparently remote hydraulics and a power steering options are possible by products of this unit - more $$ of course. I'm not sure I need somethng that fancy but I sure would like to be able to get in and out of my dirt floor barn without producing a huge cloud of dust /w3tcompact/icons/grin.gif.
Cheers
Bob
A fine looking piece of machinery. I actually have a Zane Thang on my little Fergie and, after a bit of adjustment I am really pleased with how it works. The Live Thang is something different which, if I understand the messages on YTMAG, will allow the PTO to be shut off but still let the Hydraulics lift the 3pt - as one person described it I can drive down the road with my Bush Hog attached, have my Hydraulics on so the BH doesn't slump down, and not have the blade spinning. Apparently remote hydraulics and a power steering options are possible by products of this unit - more $$ of course. I'm not sure I need somethng that fancy but I sure would like to be able to get in and out of my dirt floor barn without producing a huge cloud of dust /w3tcompact/icons/grin.gif.
Cheers
Bob
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Lets see.. if you are looking for a bit newer, I know the John deere 2240 circa... oh 1979 had independent pto. My stepfather has one.. the pto is hydro engaged from a little flip up lever under the steering column.
Soundguy
<font color=green>Thanks John and Soundguy
I needed a little confirmation that I wasn't completely out to lunch in thinking that I could get IPTO - now the challenge is finding it on an older, less expensie tractor. I've been looking at Fergusons and Massey Fergusons 'cause I am using a '51 Ferguson 2085 now and I realy like the size and manoverability, the fact that I can get parts easily and, even for an amateur like me, some repairs are actually within my skill level. Are there other colours that I should investigate? What models?
Soundguy
<font color=green>Thanks John and Soundguy
I needed a little confirmation that I wasn't completely out to lunch in thinking that I could get IPTO - now the challenge is finding it on an older, less expensie tractor. I've been looking at Fergusons and Massey Fergusons 'cause I am using a '51 Ferguson 2085 now and I realy like the size and manoverability, the fact that I can get parts easily and, even for an amateur like me, some repairs are actually within my skill level. Are there other colours that I should investigate? What models?