Loader Install

[CHRIS_PLUCKER]

Got my new loader thurs. night, started to install it last night. Have to say Kubota's directions are lacking in detail, All three hard lines are color coded, however the install manual does not specify which color connect to which port. After much trial an error We got the right one on the right place, but I did not route it correctly up front between the frame rail!!! Afew more hours and it will be on, I will be ready to dig soon !

Chris Plucker

 

[CHRIS_PLUCKER]

Got my new loader thurs. night, started to install it last night. Have to say Kubota's directions are lacking in detail, All three hard lines are color coded, however the install manual does not specify which color connect to which port. After much trial an error We got the right one on the right place, but I did not route it correctly up front between the frame rail!!! Afew more hours and it will be on, I will be ready to dig soon !

Chris Plucker

 

[chrisjbell]

Installing the loader is always a Good Time /forums/images/graemlins/tongue.gif. It does get easier with experience. Mine had little color coded paper dots on the connectors, which fell off promptly. I grabbed several different colors of spray paint and made my own marks - *after* having to play "Which Line Is It", of course. Always fun to watch the bucket go up when you think it should be going down /forums/images/graemlins/grin.gif.

 

[chrisjbell]

Installing the loader is always a Good Time /forums/images/graemlins/tongue.gif. It does get easier with experience. Mine had little color coded paper dots on the connectors, which fell off promptly. I grabbed several different colors of spray paint and made my own marks - *after* having to play "Which Line Is It", of course. Always fun to watch the bucket go up when you think it should be going down /forums/images/graemlins/grin.gif.

 

[sandyc]

I use different colored wire ties to indicate what goes where.
Really helps when I switch out the FEL and put the plow/blower sub-frame on.

Just an fyi

 

[sandyc]

I use different colored wire ties to indicate what goes where.
Really helps when I switch out the FEL and put the plow/blower sub-frame on.

Just an fyi