Loader Problem with McCormick CT47

[mmfarm]

I have a 2008 McCormick CT47 (LS) tractor with 400 hours. The tractor has the factory L111 loader. I recently broke a pressure line to the loader and replaced. In addition, I changed the hydraulic fluid and filter. I am now experiencing and issue with the loader lifting and tilting up, a 1000 pound bale of hay. I did not have this problem before the aforementioned action. Now just to life a bale of hay I have to push the engine rpms above 2000 to just lift the hay bale and sometimes it will not lift the bale. I have recycled the loader numerous time to address any air in line issue. Any suggestions would be appreciated. Thanks

 

[J_J]

Install a hyd gage and see what the pressure is.

You may still have some air in the cyl.

 

[mmfarm]

Thanks, I have a gage and will give it a shot.