loader trouble

[hernando]

i have a 1540 massey ,,with a massey loader ...it has started to leak down ..not the up or down but the curl part ..it will leak all the way to the dump position ...do i need to rebuild the cylinders or is it somthing else ??? thanks for the help bruce

 

[bjcsc]

Could be the cylinders or it could be the valve. Recently there was a thread that described how to isolate and check them but I can't remember the procedure. Someone will know...


edit: Here it is...

 

[3RRL]

You switch the curl/dump and raise/lower hoses to see if it's the valve or cylinders.

 

[hernando]

thanks for the help .....going to try that today...bruce