grsthegreat
Super Star Member
Yes, and have been using mine for 3-4 years. Wonderful tool
Oil & Fuel Lock N Lube
- Thread starter RalphVa
- Start date
- Views: 4293
goeduck
Super Star Member
So what is this Lumax LX-1403 I see advertised at the top of the page. Competion?
Last edited:
cathy liebchen
Platinum Member
Looks like an inferior knock off, weird design with those tiny screws on it
mcfarmall
Veteran Member
- Joined
- Oct 1, 2015
- Messages
- 1,482
- Location
- Kalamazoo, MI
- Tractor
- Kubota M5660, Farmall C, JD 260 lawn tractor
Who in their right mind would make something so complicated with screws to hold it together??
Nightforce
Silver Member
- Joined
- Aug 6, 2014
- Messages
- 165
- Location
- Rehoboth, MA
- Tractor
- Kubota BX25D, John Deer D140, Craftsman GT6000
Because of the price, and never had one my entire life, I almost didn't buy one....Almost being the operative word...
I did end up buying one over a year ago and I've got to tell you this is one slick little device which when mounted to a flexible hose takes all the frustration out of maintenance. In fact, it worked so well I now have three of them!
I did end up buying one over a year ago and I've got to tell you this is one slick little device which when mounted to a flexible hose takes all the frustration out of maintenance. In fact, it worked so well I now have three of them!
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,294
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Right. :thumbsup:
I may have the only lever gun with a 48" hose:
.
I may have the only lever gun with a 48" hose:
.
goeduck
Super Star Member
Everything you own must be supersized. :laughing: very nice as usual
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 33,727
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
If you use a lever gun a hose becomes advantageous and the LnL is valued.
I haven't used a lever gun for at least 25 years. Don't even have an old one laying around.
Our needs and uses vary a lot here
I haven't used a lever gun for at least 25 years. Don't even have an old one laying around.
Our needs and uses vary a lot here
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,294
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Yep, needs, uses and preferences are very different.
I prefer the lever gun over the Lincoln, even though it also has a LockNLube :thumbsup::
I prefer the lever gun over the Lincoln, even though it also has a LockNLube :thumbsup::
Geotech
Silver Member
I can't even fathom why anyone would buy a traditional grease gun over a Lube Shuttle grease gun. They also have a zerk lock fitting that works as well as LnL. I mentioned it earlier in the thread, but it's like it wasn't seen.
Check out this video that TractorTimeWithTim made: New Grease Gun Technology! Greasing The 125R/123E Drive Shaft - YouTube
They have powered guns as well. Little bit more expensive, but well, well, well worth it.
Check out this video that TractorTimeWithTim made: New Grease Gun Technology! Greasing The 125R/123E Drive Shaft - YouTube
They have powered guns as well. Little bit more expensive, but well, well, well worth it.
Trillium Farm
Gold Member
- Joined
- Dec 26, 2014
- Messages
- 473
- Tractor
- Massey 50
Lock & Lube also has a G-Gun for those who have a lot of greasing to do, works great!
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,294
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Yep for those that have not seen the G.Gun:
