Locking Old Threads

/ Locking Old Threads #1  

SnowRidge

Elite Member
Joined
Jul 4, 2003
Messages
2,818
Location
East Tennessee
Tractor
Power Trac PT-425 / Branson 3520
I would like to suggest that old threads be locked after a period of inactivity. I don't know if the forum software supports that or not, but if it does, I think it would be a good feature to utilize.

Today, someone resurected a seven year old thread. Instead of starting a new thread with a link to the old, he just added on to it. Too often, users don't realize how old a post may be, then go ahead and respond to it needlessly, wasting their and other users' time. Locking old threads would minimize this.

Ideally, threads would lock automatically once a certain number of days have passed with no new posts. I would also suggest, if it is feasible, that thread originators be able to lock a thread once a decent, but shorter interval has passed with no new posts.

Thanks for considering this -- and for hosting TBN. :)
 
/ Locking Old Threads #2  
I know this isn't a democracy, but I for one object to SnowRidge's suggestion. I found the thread extremely interesting, even if it was 7 years old. What about being 7 years old makes the discussion invalid? What the heck different would it have been if a new thread had been started with a link? You would have to take an extra step to see what the poster was talking about, which was avoided by simply adding to the existing discussion. I much prefer that (one thread even if old) to the ten thousand threads we have asking the same questions over and over.

By the Way------ Bird, you been hanging around here a loooonggg time!:)
 
/ Locking Old Threads
  • Thread Starter
#3  
jeffinsgf said:
I know this isn't a democracy, but I for one object to SnowRidge's suggestion. I found the thread extremely interesting, even if it was 7 years old. What about being 7 years old makes the discussion invalid? What the heck different would it have been if a new thread had been started with a link? You would have to take an extra step to see what the poster was talking about, which was avoided by simply adding to the existing discussion. I much prefer that (one thread even if old) to the ten thousand threads we have asking the same questions over and over.
What is wrong with it? Well, a lot of threads are started by someone asking a question. When a dead thread is revived, people often unknowingly respond to questions that have long been moot. Sometimes these folks take considerable time to frame their answers, only to find out later that they have been wasting their time. Locking old threads will help prevent that.
 
/ Locking Old Threads #4  
By the Way------ Bird, you been hanging around here a loooonggg time!:)

That's a fact.:) But what 7 year old thread are we talking about? I haven't read everything today.:rolleyes: As for locking old threads . . . I don't know. Of course, I don't know what would be involved in having the software do it automatically since that would have to be up to Muhammad and/or Ibrahim. But I can see both reasons for doing it, and reasons for not doing it. Something might change my mind, but my initial thoughts are to leave it alone.
 
/ Locking Old Threads #6  
I sure don't find the issue moot. In fact, I deal with it a couple times a year and gleaned some interesting options from the thread. I still fail to see the advantage of starting a new thread with a link to the old compared to just adding to the old discussion.

Anytime I start reading a thread that is more than one page long, I check the post date of the opening post to see how long the conversation has been going on.
 
/ Locking Old Threads #7  
jeffinsgf said:
In fact, I deal with it a couple times a year and gleaned some interesting options from the thread.
In case someone is confused, locking a thread doesn't prevent someone from reading it and gleaning information from it, it just stops people from adding new posts.

Before I'd even think about posting in an ancient thread, I'd asked myself, "Is what I am about to post really worth reviving a thread that's over 7 years old?" My answer to the thread Snowridge mentioned would be a decided NO. What does yet another example add to the thread, when most of the people who made the thread 'alive' years ago may not be active posters? At a minimum they are not involved in the thread anymore. Posting in an old thread never made much sense to me.
 
/ Locking Old Threads
  • Thread Starter
#8  
jeffinsgf said:
I sure don't find the issue moot. In fact, I deal with it a couple times a year and gleaned some interesting options from the thread. I still fail to see the advantage of starting a new thread with a link to the old compared to just adding to the old discussion.

Anytime I start reading a thread that is more than one page long, I check the post date of the opening post to see how long the conversation has been going on.
The link lets people know right away that it is an old thread, and helps to prevent them from inadvertently paging through very old postings before they realize what is going on, or worse, responding to a moot question. People shouldn't have to be 'on guard' for ancient posts every time something pops up in "Recent Threads."
 
/ Locking Old Threads #9  
Interesting points. People here are good about discussing something that has been discussed before so we don't get any bashing about duplicate threads. At the same time most do seach the forums for information rather than start a duplicate thread.
I'm not taking sides but I could easily open an old thread thinking I was doing the right thing by not creating a duplicate.
On the other hand in other sites and forums I have participated in, there have been people who revive dead threads for a giggle. That gets old fast.
 
/ Locking Old Threads #10  
I'm new to TBN but have been around forums long enough to know that the poster would get flammed for starting a new thread. How many times have you read (or posted) "Try using the search function, this was discussed x number of years ago" ?

Some old threads may have value, some may be a waste of time. It would be hard to make a blanket policy to cover all circumstances. :twocents:
 
/ Locking Old Threads #11  
You know I can't recall every disagreeing with MikePA before, but in this case, I don't see anything wrong with someone reviving that old thread.:D

Of course this is just a 2 year old picture, but no one has used a ball bat on my current mailbox.

The odd thing is that the brick pedestal (or whatever you want to call it) for mailboxes is fairly common in this general area, but mine is the only one on this street.
 

Attachments

  • PB290023 (Small).JPG
    PB290023 (Small).JPG
    64.7 KB · Views: 170
/ Locking Old Threads #12  
The poster that revived it said he was just reading through old posts and came across that one. That seems like fair warning to me, that the post was an old one.

Also, several folks in the power trac forum occasionally "bump" up posts to revive an old discussion when it seems relevant again.

I see no harm in leaving old threads open to come back another day.
 
/ Locking Old Threads #13  
Bird said:
You know I can't recall every disagreeing with MikePA before...
:) :)
 
/ Locking Old Threads
  • Thread Starter
#14  
MossRoad said:
The poster that revived it said he was just reading through old posts and came across that one. That seems like fair warning to me, that the post was an old one.
It is no warning at all for those who just click on the main link.

BTW, the quasi official web term for the practice of reviving ancient threads is necroposting. :)
 
/ Locking Old Threads #17  
SnowRidge said:
It is no warning at all for those who just click on the main link.

BTW, the quasi official web term for the practice of reviving ancient threads is necroposting. :)

Necroposting! Now that's funny! :)
 
/ Locking Old Threads #18  
I just did a seach to make sure we haven't discussed this before. All is clear. Carry on. :)
 
/ Locking Old Threads #19  
Tig said:
I just did a seach to make sure we haven't discussed this before. All is clear. Carry on. :)
:D :D :D
 
/ Locking Old Threads #20  
MossRoad said:
Necroposting! Now that's funny! :)

I think you can go to prison for that can't ya:rolleyes:
 

Marketplace Items

445 (A63290)
445 (A63290)
2003 30ft Rinker Captiva Boat w 2017 30ft Tri-Axle HMDE Boat Trailer (A66738)
2003 30ft Rinker...
ALLMAND  MAXI-LITE II V (A67714)
ALLMAND MAXI-LITE...
2019 Chevrolet Tahoe SUV (A66738)
2019 Chevrolet...
2018 FREIGHTLINER CASCADIA 125 6X4 T/S SLEEPER TRUCK TRACTOR (A69167)
2018 FREIGHTLINER...
PALLET OF TOOLBOXES (A68842)
PALLET OF...
 
Top