Log Splitter lift table build

   / Log Splitter lift table build
  • Thread Starter
#11  
splitter 1.jpg Thanks CliffordK This is the first Pic where I build the side tables .. Small table where she stands and a larger one for the in feed side..
 
   / Log Splitter lift table build #12  
Glad you got the photos working.
It looks nice.

Is the table on the left for loading the splitter, and on the right for unloading? Of course, you still have half the split piece on each side, but I assume it is easy enough to shove it aside.

It is hard to tell height from here, but I assume the left table is at the same height as the bar in the splitter.
 
   / Log Splitter lift table build
  • Thread Starter
#13  
DSC00003.JPG This is the hinges going on to the lift table,, I used 1" black pipe and some 1" rod stock I had kicking around,,
 
   / Log Splitter lift table build
  • Thread Starter
#14  
Glad you got the photos working.
It looks nice.

Is the table on the left for loading the splitter, and on the right for unloading? Of course, you still have half the split piece on each side, but I assume it is easy enough to shove it aside.

It is hard to tell height from here, but I assume the left table is at the same height as the bar in the splitter.

The table on the right is just there to give a place to slide the split piece out onto the accumulator table..
 
   / Log Splitter lift table build
  • Thread Starter
#15  
splitter3.jpg Here is the accumulator table done,, As she splits she fills up this table and then throws them in the loader to take to the pile,,

I have to wait for the wife to load more pic's on the stick so I can show you more..

The whole thing when stored in the barn will fold up so that it keeps the same footprint as before,,,
 
   / Log Splitter lift table build
  • Thread Starter
#16  
DSCN0001.JPG This is the first test run after all the hydraulics were installed,,,
 
   / Log Splitter lift table build
  • Thread Starter
#17  
DSCN0004.jpg Weight test is done now for a log,, Opps I forgot to put on the stabilizer bar.. I'll install it before the log though..
 
   / Log Splitter lift table build
  • Thread Starter
#18  
DSCN0006.JPG The real weight test,, notice the support leg on the other side of the lift table.. After she finished 6 cord with it this year she found that you could fill the table then just roll them up to you when ready ..
 
   / Log Splitter lift table build
  • Thread Starter
#19  
DSCN0011.JPG Final test in the garage,, She likes it,, :)
 
   / Log Splitter lift table build
  • Thread Starter
#20  
One thing she did find out while using it is if you get real round big ones,,, Don't lift too fast.. One rolled right through the splitter onto the ground,, She stepped out of the way.. We didn't get pictures of it out in the field but still have a few apple tree butts to do,,
 

Tractor & Equipment Auctions

New/Unused 10ft 18 Drawer Stainless Steel Workbench (A44391)
New/Unused 10ft 18...
Kivel 48in Forks and Frame Skid Steer Attachment (A44571)
Kivel 48in Forks...
2008 FORD F650 BUCKET TRUCK (A43004)
2008 FORD F650...
2001 Ford F-550 Crew Cab Auto Crane 4004EH 4,000LB Mechanics Crane Service Truck (A44571)
2001 Ford F-550...
(4) Solid Skid Steer Wheels and Tries (A44391)
(4) Solid Skid...
1998 Chrysler Sebring JXi Convertible (A44572)
1998 Chrysler...
 
Top