LOL! Mower hydraulics not connected in this PT demo!

[SpringHollow]

It is the tooth's linear velocity that is important. As you increase the diameter of the saw, you increase the tip speed. But the blade can stall easier because of leverage? But this allows a slower rpm which lets you go to a higher torque motor. It might be worth looking up the calculations to see where the sweet spot is.

Ken

 

[woodlandfarms]

Man Ken, that is WAY too much science for a guy like me. How about this. I look at other peoples designs and steal it? ;-)

I have been looking at 2 hydrualic driven machines. Both have some sort of gear box but I can't tell the actual implications (if they are gear up, gear down or just 90 angle adjusters).

The other thing I could do is just take my wheel motor I got for my Post Hole digger and slap a disk on it. Maybe that would work? Ton of torque going at 160 RPM.

 

[J_J]

This motor has more torque, but is also more expensive.

Surplus Center - 4.9 cu in CHAR-LYNN 104-1061 HYD MOTOR

 

[woodlandfarms]

JJ so this really confuses me. Motor has identical size but creates more torque?

 

[J_J]

JJ so this really confuses me. Motor has identical size but creates more torque?

4.9 cu in motor

The difference is in the pressure.

Disp. 4.95 cu. in. / rev.
Pressure 2576 PSI cont.
Pressure 3091 PSI int.
Torque 1682 in-lb. cont.
Torque 2124 in-lb. int.
Speed 800 RPM cont.
Speed 990 RPM int.
Flow 17.1 GPM cont.
Flow 21.0 GPM int.

Disp. 4.9 cu. in. / rev.
Motor Type Geroler
Pressure:
3000 PSI cont.
4000 PSI int.
Torque:
2065 in-lbs. cont.
3035 in-lbs. int.
Speed:
908 RPM cont.
908 RPM int.

 

[BobRip]

BobR. The fact you have an Ipad I find wonderful.

Thanks for the advice. I am a huge mac addict and the wife got me one for my birthday, but I am pulling 16's at work and have not had the time to do much more than email....

I really like the IPAD, but the learning curve is more than I thought. Also it does have some limitations some of which are addressed in the IOS5 upgrade. I took a one hour class at the Apple store and that helped. About 90% of my computing it done on the Ipad. Not right now though. I am in Germany and they do not have wifi at this house. It is a struggle to use windows here. All of the right mouse click stuff is in German. I am heading to a new location tomorrow and should have it there.