Long 360 tractor. I changed the primary fuel filter and the tractor started ok and I ran it for a couple of hours. I changed the secondary fuel filter and it will not start. I read the instructions for bleeding the lines and followed it all through but the tractor still will not start. There is no smoke or anything coming from the exhaust. I have tried it many times and still no luck. any help would be appreciated. On the injector when I bleed on the bottom fuel comes out but not in a stream, I do not know if that is normal or not. When I press the fuel pump fuel comes out of the injector bleed screw but just when I press the pump but not in a stream.
