Looking at new machine: MIG or TIG

   / Looking at new machine: MIG or TIG
  • Thread Starter
#21  
It can come with me as well. It will be a "green" day...... when I can finally get the time off and don't have other responsibilities.

I will even bring Brand X and you can do a 7018 runoff between that and the PA300.
 
   / Looking at new machine: MIG or TIG #22  
Depending on what you plan on welding you could go either way. TIG is probably better for detailed work but when you need to weld a lot in a hurry it is hard to beat a spool gun.

I was talking to a guy yesterday that puts non stick liners in aluminum belly dump trailers. Once they put the liners in they have to weld lips around the top to hold them in and keep the material being hauled from getting behind the liner. He said they run through 50+ spools of aluminum wire a day. Can you imagine how long that would take to TIG? On the flip side I have seen some people do very intricate work with TIG that would be virtually impossible with a spool gun.
 
   / Looking at new machine: MIG or TIG #23  
It can come with me as well. It will be a "green" day...... when I can finally get the time off and don't have other responsibilities.

I will even bring Brand X and you can do a 7018 runoff between that and the PA300.
I can come to your place too. When you get some time in your schedule, give me a little lead time. I'll cut up some plate, so we can have a refresher course on vertical up hill welding with 7018.:thumbsup:
 

Tractor & Equipment Auctions

2011 Ford Crown Victoria Sedan (A54815)
2011 Ford Crown...
New/Unused 10ft X 20ft Single Garage Metal Shed (A54865)
New/Unused 10ft X...
Case 950 8 Row Air Planter (A55302)
Case 950 8 Row Air...
PALLET OF SCAFFOLDING (APPROX. 7 PC) (A52706)
PALLET OF...
2001 Blue Bird Commercial Portable Office Bus (A51692)
2001 Blue Bird...
KIDS DIRT BIKE (A53424)
KIDS DIRT BIKE...
 
Top