Looking for fisher snowplow adapter

71bronco · Oct 27, 2011

woodstacker said:
I like how you have the plow mounted under the loader. Just about ready to start building the loader atachment For a Dk 55 Koiti with a fisher plow.
Just started to snow today so I better hurry.

Just started mine today also. I bought mine with mounts on the front of the QA adapter plate but am changing to a rear mount so the plow doesn't stick out so far. I was able to move it back about 14" behind the plate. I'll post some pics if I finish it this weekend.

Here's a pic before mods

Jeff

woodstacker · Oct 28, 2011

Hi.
Any problem getting the Quickatach to work if the plowframe is mounted under it?

71bronco · Oct 29, 2011

woodstacker said:
Hi.
Any problem getting the Quickatach to work if the plowframe is mounted under it?

No problem at all. I just finished welding it up and it goes on and off easy. I just have to paint and I'll be ready for snow.

Jeff

71bronco · Oct 29, 2011

Some more pics. With the bar on the loader I had to drop it down 5" and then back 15". I could have gone back more and still have full angle but I was worried thar would stress it too much. That bar makes it harder.

Jeff

71bronco · Oct 29, 2011

I also made a ballast barrel. It has a receiver hitch and a place for a chainsaw scabbard. I left the concrete 4" so I can put gas and oil and chains on top. Also put in plastic pipe for shovels,rakes or whatever. Should make the plowing easier.

Jeff

woodstacker · Oct 29, 2011

Thanks for the pictures.I have a woods loader but it has the same bar and the handles are the same for the quickdisconect. So the pictures you sent will help. I almost got the quickdisconect plat done then I can start on the plow mount.