LS Tractor Owner
Elite Member
- Joined
- May 1, 2017
- Messages
- 3,831
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Pm me with your email. I can send you the sections of the service manual relating to the hydraulic system, including where to tap into the HST.
I found that my loader relief pressure was set 220lbs under the spec pressure. Turned it up until it was to spec.... it did make a difference with the loader operation.
I found that my loader relief pressure was set 220lbs under the spec pressure. Turned it up until it was to spec.... it did make a difference with the loader operation.
