To be really honest, I have put my Tractor away because I don't want to get it Dirty. LOL. its real wet here right now, and the clouds are forming, so Snow anytime now. (be glad when it does Snow) I won't to try out this Heater.LOL.
LS Room for improvement.
- Thread starter I have no memory
- Start date
- Views: 33907
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,917
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Where are you located Lontex. We had about a 1/4" of snow last night in Bismarck Ark.
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,917
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
I used my heater a few times, but in sunny weather, the sunlight heats you up pretty good even in 30 degree temps. I love that cab, but it is a lot more difficult with a cab to work the FEL and gauge distances and sometimes the glare on the glass is downright impossible to see. That said, I still wouldnt trade for one without a cab. Sometimes, for really finess stuff up against buildings etc, I will fire up the little Yanmar. I really would love to trade my 50 HP Yanmar for a little SCUT Kubota with TLB. That would be perfect companion for the LS.
Tul01
Gold Member
- Joined
- Jan 29, 2007
- Messages
- 272
- Location
- Manitoba, Canada
- Tractor
- 2015 John Deere 5115M, 1928 and 1945 hand start John Deere D's,
Hi guys just wondering if you have been able to confirm the loader lift capabilities we are very close to dealing on a 7040C that uses the same loader as yours. One of our requirements is to lift 2500lb pallets with pallet forks. Any thoughts?
Thanks
Brent
Thanks
Brent
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,917
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
My loader will lift the rear wheels off the ground. It doesnt have the tires loaded but I usually have my box blade on back for counterweight. I have had it loaded with heaped up bucket full of Shale with no problem lifting. Traversing across hard dirt felt like it had steel tracks on the front as i could feel each bar tread as it hit the ground, but again, no problem lifting that up. I did tweak the relief setting on mine to get a little more curl pressure which I think is still a little lower than specified.
Tul01
Gold Member
- Joined
- Jan 29, 2007
- Messages
- 272
- Location
- Manitoba, Canada
- Tractor
- 2015 John Deere 5115M, 1928 and 1945 hand start John Deere D's,
thanks for the quick input
Brent
Brent
TUL01.
The 7040C is the much Larger Tractor we have been talking about, the Loader on that Tractor is Larger than the Loader on the 7010. so all round you should be in good shape, I would think your loader will pick up the 7010 and Dump it. LOL
The 7040C is the much Larger Tractor we have been talking about, the Loader on that Tractor is Larger than the Loader on the 7010. so all round you should be in good shape, I would think your loader will pick up the 7010 and Dump it. LOL
toxicjeeper
Silver Member
Hey Gary where is the relief setting on your tractor? I would like a little more curl pressure on mine too..Mine is a 5020 so definitly not the same loader but i am curious if there is a way to change mine..Thanks
