LT 1046 RevTek not working

   / LT 1046 RevTek not working #1  

xjdaddy

New member
Joined
Sep 19, 2005
Messages
1
Just a question to see if you all have had problems with the reverse mow feature. My 1046 has a little over 6 hours and last week when mowing, the revTek stopped working, and the PTO would cut off in reverse about 8 times out of 10 with it on and the light lit. Any ideas? I just went in yesterday and disabled the reverse switch altogether, but I would like to know what might be wrong just for curiosity...
 
   / LT 1046 RevTek not working #2  
Could you have been inadvertantly triggering the seat switch? That's the first I've heard of this problem /forums/images/graemlins/confused.gif The only other thing I could think of is a loose connection or the 'ol burnt/broken wire insulation thing.
G/luck
Joel
 
   / LT 1046 RevTek not working #3  
I was squirming around in my seat ol my GT1550 while cutting in reverse and it would let that switch cut off every time. You have tn keep ykur rear planted in that seat to avoid it.

John
 

Tractor & Equipment Auctions

2016 TAKEUCHI TL8 SKID STEER (A51242)
2016 TAKEUCHI TL8...
CATERPILLAR 325FL EXCAVATOR (A51242)
CATERPILLAR 325FL...
2020 KUBOTA SSV75 WHEELED SKID STEER (A51242)
2020 KUBOTA SSV75...
Aluma 7712H Tilt Trailer (A50514)
Aluma 7712H Tilt...
2017 Bad Boy Outlaw XP 61in Zero Turn Mower (A48082)
2017 Bad Boy...
2013 Chevrolet Caprice (A50324)
2013 Chevrolet...
 
Top