LT 1046 RevTek not working

   / LT 1046 RevTek not working #1  

xjdaddy

New member
Joined
Sep 19, 2005
Messages
1
Just a question to see if you all have had problems with the reverse mow feature. My 1046 has a little over 6 hours and last week when mowing, the revTek stopped working, and the PTO would cut off in reverse about 8 times out of 10 with it on and the light lit. Any ideas? I just went in yesterday and disabled the reverse switch altogether, but I would like to know what might be wrong just for curiosity...
 
   / LT 1046 RevTek not working #2  
Could you have been inadvertantly triggering the seat switch? That's the first I've heard of this problem /forums/images/graemlins/confused.gif The only other thing I could think of is a loose connection or the 'ol burnt/broken wire insulation thing.
G/luck
Joel
 
   / LT 1046 RevTek not working #3  
I was squirming around in my seat ol my GT1550 while cutting in reverse and it would let that switch cut off every time. You have tn keep ykur rear planted in that seat to avoid it.

John
 

Tractor & Equipment Auctions

SAKAI SW502S-1 SMOOTH DBL DRUM ROLLER (A51242)
SAKAI SW502S-1...
Unused 2025 CFG Industrial MX50R Mini Excavator (A50322)
Unused 2025 CFG...
2017 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A50323)
2017 Chevrolet...
2021 CATERPILLAR 299D3 SKID STEER (A51242)
2021 CATERPILLAR...
2009 Lee-Boy 8510HD Conveyer Feed paver (A52128)
2009 Lee-Boy...
2018 KUBOTA SVL95-2S SKID STEER (A51242)
2018 KUBOTA...
 
Top