LT200 loader JIC fitting size?

[myyaz33]

Does anyone happen to know the JIC fitting size on the LT200 loader for the T233 T273 T293 tractors? Looks like a 5/16 or 3/8"

 

[myyaz33]

Maybe pictures will be helpful.

 

[SPYDERLK]

Maybe pictures will be helpful.

View attachment 466339View attachment 466340View attachment 466341View attachment 466342

JIC 4. - The male portion should be a 7/16 x 20 thread.

 

[muddstopper]

I had problems trying to replace a hose on a alamo long arm mower. A #4 nor #6 jic didnt fit, tried metric, nope. Turns out they used a #5jic. I didnt know they even made such a thing, but thats what it was

 

[myyaz33]

Confirmed they are JIC-4 1/4" . Thanks for the help.

 

[myyaz33]

Confirmed they are JIC-4 1/4" . Thanks for the help.

FYI- I was wrong on the size. They are NOT 1/4 JIC-4 Still trying to get the proper size identified in the thread below.
http://www.tractorbynet.com/forums/hydraulics/356934-jic-fitting-size.html

 

[myyaz33]

Confirmed they are JIC-4 1/4" . Thanks for the help.

I was incorrect above, they DO NOT use JIC-4.

Final confirmation that the steel tubing usings a JIC 6 fitting and the cylinders themselves use a JIC 5 fitting.