M59 Wire Routing

pepper66 · Nov 18, 2018

Have an M59. Wiring under floorboard not correctly installed from a previous repair. I have repaired the loom in a few places and reinstalled it. Could someone get a picture of the routing. Looking left to right seems to be the best angle.
Would be greatly appreciated.

Jchonline · Nov 19, 2018

In case they dont see it, can you check this thread and PM some of those guys? They have M59s. I have M62 but it is sitting in my garage...2 hours away. Sorry I am not much help at present.

https://www.tractorbynet.com/forums/kubota-owning-operating/403337-kubota-tlb-cab-project.html

You may also want to consider orangetractortalks.com and posting on their forums if you dont get a response here.

pepper66 · Nov 19, 2018

Thanks for the reply.
I bought the machine used, and whoever worked on it did not reinstall the wiring loom correctly. I partially removed the loom that was not fastened at all. I repaired the damage wiring and removed some previous shoddy repairs. I found the proper wire ties and installed the loom the way I think it should be routed. After looking at it for a while I'm not sure it's right. The Kubota WSM does not show many clear pictures of the loom routing.

mikester · Nov 20, 2018

pepper66 said:
Have an M59. Wiring under floorboard not correctly installed from a previous repair. I have repaired the loom in a few places and reinstalled it. Could someone get a picture of the routing. Looking left to right seems to be the best angle.
Would be greatly appreciated.

If you post a photo of your area in question I can see if I can get some shots from mine.