cedarstump
New member
Need to purchase a set of sockets that fit my M7060 but need to know if the are SAE or metric sizes. Couldn't find anything in manual so thought i would ask the experts.
M7060 Lug Nut size
- Thread starter cedarstump
- Start date
- Views: 21377
OP
cedarstump
New member
Thank you. Anyone know what size they are?
Dave M7040
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 2,757
- Location
- Williamstown Ontario Canada
- Tractor
- Kubota M7040 Nuffield 465
See attached WSM page with the info
An edit: as I look at the page it strikes me the M16 for example is the thread size not the outer nut dimension for a socket
Dave M7040
An edit: as I look at the page it strikes me the M16 for example is the thread size not the outer nut dimension for a socket
Dave M7040
MechanicalGuy
Platinum Member
I know this isn't much help to you but my mx5200 is 24mm. I went around my tractor with a paint marker and marked all major bolts/nuts with a paint marker for size. This is needed because my tractor is at a remote property and I have to specifically bring tools in that I need for jobs that I may do, and I can't be searching for the right size or bringing my whole tool box all the time.
MechanicalGuy
Platinum Member
Implements are standard though. Keep that in mind.
ptsg
Super Member
But the OP was asking for what type of sockets to get for the tractor...
MechanicalGuy
Platinum Member
Hence the "keep that in mind" suggestion. I use metric on my implement nuts too, but it's smart to know how it's put together.
MechanicalGuy
Platinum Member
This means his m16 threaded stud would use a m24 socket, just like my mx.
Metric Bolt Dimensions | Atlanta Rod and Manufacturing - Atlanta Rod and Manufacturing
