Machinery lay down area project

/ Machinery lay down area project #1  

Theowegian

Gold Member
Joined
Dec 8, 2003
Messages
456
Location
Emporia, Kansas
Tractor
Kubota L3130 HST
Im building a 20' by 20' "pad" that I can park my trailers and implements on. In the future, maybe I'll build a pole shed over this area. I would like any comment you might have.
thanks, dwight
 

Attachments

  • 465668-pix1.jpg
    465668-pix1.jpg
    89 KB · Views: 375
/ Machinery lay down area project
  • Thread Starter
#2  
Here's a little more fill dirt and gravel.
 

Attachments

  • 465670-pix2.jpg
    465670-pix2.jpg
    79.9 KB · Views: 297
/ Machinery lay down area project
  • Thread Starter
#3  
Now its ready for limestone screenings, to make it level, keep the weeds out and turn to concrete!
 

Attachments

  • 465671-pix3.JPG
    465671-pix3.JPG
    71.5 KB · Views: 293
/ Machinery lay down area project
  • Thread Starter
#4  
The last picture. Almost complete. 15 tons of dirt plus 5 tons of commercial limestone screenings packed with the tractor. Total project time: 7.5 hrs.
dwight
 

Attachments

  • 465674-pix4.jpg
    465674-pix4.jpg
    66.8 KB · Views: 322
/ Machinery lay down area project #5  
I was getting worried. It took 3 pictures before the tractor finally showed up! /forums/images/graemlins/shocked.gif /forums/images/graemlins/grin.gif

How big is the finished pad going to be? I know you already have the basic size all laid out, but if you might add a pole barn later, you might want to consider making the pad a bit bigger. Based on experience and other comments from guys who have built pole barns, you never can have them large enough.

Nice project for some seat time! Keep us posted as you continue with it! /forums/images/graemlins/smirk.gif /forums/images/graemlins/grin.gif
 
/ Machinery lay down area project #6  
Handy pad to have. I'm curious as to why you didn't excavate first, though, or at least scrape off the grass and topsoil. It could get mushy in spring, even with a nice cap of crusher run like that.
 
/ Machinery lay down area project
  • Thread Starter
#7  
Good question.
Actually, the area I selected was an old cattle loading pen, that grew little grass. Previous owner put a lot of crushed concrete in there. It would have been difficult to work. In fact, that was one reason I chose that location...poor topsoil, mostly gravel anyways, finally it was close to a pretty good part of the driveway where the cattle trucks would load up.

Also, notice that the maple stakes are all crooked. Horrible to get them in straight!
dwight
 
/ Machinery lay down area project #8  
"poor topsoil, mostly gravel anyways, finally it was close to a pretty good part of the driveway where the cattle trucks would load up ..."

That sounds like my front yard!
 

Marketplace Items

2018 Kenworth W900 Ext. Day Cab (A62613)
2018 Kenworth W900...
500BBL WHEELED FRAC TANK (A58214)
500BBL WHEELED...
Bulk Lot of over 600 NEW Motorcycle Sprockets - 1980s to Present (A63118)
Bulk Lot of over...
2000 Bobcat 863 High Flow Compact Wheel Loader Skid Steer (A59228)
2000 Bobcat 863...
2019 VOLVO SD115B SMOOTH DRUM ROLLER (A62129)
2019 VOLVO SD115B...
2013 CATERPILLAR 299D SKID STEER (A60429)
2013 CATERPILLAR...
 
Top