Makita (Dolmar) Clutch drum parts help. EA 7300P

[mastercraftka]

Looking for the best place to find a replacement clutch drum(sprocket)

 

[RandyT]

The clutch drum part number is 957 223 092. Dolmar/Makita doesn't have a lot of aftermarket part following so may have to find OEM. If the drum isn't damaged should be able to just replace the rim

 

[5030]

Mot sure but Sawzilla might.

 

[mastercraftka]

The clutch drum part number is 957 223 092. Dolmar/Makita doesn't have a lot of aftermarket part following so may have to find OEM. If the drum isn't damaged should be able to just replace the rim

Ya bearing are good the teeth are not good anymore

 

[RandyT]

Ya bearing are good the teeth are not good anymore

Usually occurs with the rim is allowed to wear down past its usable point, and the chain drive links eat into the main spline housing.

 

[mastercraftka]

It is a two piece and the sprocket disintegrated.

 

[TMGT]

SLE equipment has them for a decent price, I've ordered from them before, they usually have decent prices on Dolmar/Makita parts.

Makita Genuine Part 957-223-092 CLUTCH DRUM CPL., DCS6401

957-223-092 - SLE Equipment is a full line Distributor and carries 99% of all lines in the outdoor power equipment industry. Our search can be utilized to find parts for outdoor equipment from the top manufacturers in lawn equipment.

sleequipment.com

 

[xyz123]

It is a two piece and the sprocket disintegrated.

Are you saying you just need the replaceable sprocket rim? Not a clutch drum the rim goes on?

If so only like 5 bucks and 3/8 7t standard aka large prob what you have on there.

 

[mastercraftka]

Are you saying you just need the replaceable sprocket rim? Not a clutch drum the rim goes on?

If so only like 5 bucks and 3/8 7t standard aka large prob what you have on there.

View attachment 2944644
View attachment 2944645

correct thanks

 

[xyz123]

correct thanks

Can get oem or aftermarket. Standard 3/8 7T about anywhere.

Just go to local dealer. There they might get you for 10-15 sometimes for oem ones.

Power Mate® Rim Sprocket System, 3/8" 7 Standard 7 | Oregon Products

The most effective sprocket for all types of chain saw users. Get product specs and fit up info for this 3/8 inch pitch, 7 standard 7 sprocket at OregonProducts.com.

www.oregonproducts.com

Power Mate® Rim Sprocket System, 3/8" 7 Standard 7 Part# 26831​

 

[TMGT]

correct thanks

Oh that's much easier, I thought you meant it ate into the clutch drum after the drive rim broke.

 

[John_Mc]

There are three common spline sizes for the drive sprockets: Mini, small, and standard. To tell the difference:

Mini: Approx 5/8" ID
Small: Approx 3/4" ID (penny fits inside, a nickle does not)
Standard: Approx 7/8" ID (nickle fits inside with room to spare)

 

[xyz123]