malfuller
New member
Hi !I have just joined this forum today, I have a McCormick gx50 with many problems . Looking for help to get it back up and running.
Also look forward to be able to help others if I can
Cheers
Mal
Mal new member - Australia
- Thread starter malfuller
- Start date
- Views: 511
Hi !I have just joined this forum today, I have a McCormick gx50 with many problems . Looking for help to get it back up and running.
Also look forward to be able to help others if I can
Cheers
Mal
Welcome to TBN.
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Greetings to the fella from down under...
thanks for the welcome murphy1244
hope someone out there can help?
the motor will crank if i hot wire it but the motor still wont start,the solenoid in the injector pump wont open to let fuel through.
the only thing that has been touched are the diff locks, the solenoid for the diff locks appears to be on the same circuit as the stop start solenoid (which i have replaced) in the injector pump,
no dealer within 200 mile and cant get any help
cheers Mal
hope someone out there can help?
the motor will crank if i hot wire it but the motor still wont start,the solenoid in the injector pump wont open to let fuel through.
the only thing that has been touched are the diff locks, the solenoid for the diff locks appears to be on the same circuit as the stop start solenoid (which i have replaced) in the injector pump,
no dealer within 200 mile and cant get any help
cheers Mal
Depmandog
Veteran Member
- Joined
- Nov 26, 2010
- Messages
- 2,038
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
Welcome!!
Try posting your question in the Brand Specific / McCormick forum. I am sure someone that hangs out there will chime in.
Good luck with your project!
Try posting your question in the Brand Specific / McCormick forum. I am sure someone that hangs out there will chime in.
Good luck with your project!
zonta223
Platinum Member
- Joined
- Aug 26, 2009
- Messages
- 507
- Location
- Adelaide South Australia
- Tractor
- Foton FT404, International 444 with forklift, International B250, Kubota L2000DT, Truck converted to all terrain forklift and lots of other junk
I am not really knowledgeable about your particular tractor model.....but my first impression is that some safety switch is not closed.......seat.. clutch... etc That's why when you hot wire the starter it cranks but the fuel solenoid does not open. Check your safety interlocks one at a time (bypass them one at a time until the tractor starts in the normal way.
G'day from South Australia
jonyyuma
Elite Member
- Joined
- Sep 14, 2010
- Messages
- 2,504
- Location
- 35 miles North of Memphis,TN
- Tractor
- kubota L3000dt, ford 8n1952
Welcome, You do have to be resourceful to repair it when the nearest dealer is over 200 miles? We have several within 20 miles of us..Do you have a diagram or manual of the circuits and wiring?
creekbend
Super Star Member
Welcome aboard. :tractor:
