Manuals B7800

[suntreemcanic]

I just bought a B7800 HSD. I ordered an operators manual, parts manual and work shop manual. I just received my manuals and I could wait till Monday and ask the Kabota dealer where I bought the manuals but I would like to open them if they are correct. My work shop manual front cover has listed B2410, B2710 and B2910, no B7800. Is the B7800HST so old they do not print shop manuals for it any more?

 

[orezok]

The manual you ordered is correct. There are virtually no differences between the 2910 and 7800.

 

[orezok]

Heres the spec comparison between the 2910 and 7800. The only difference is that the 2910 has position control on the 3 point and the 7800 has quarter inching .

 

[Dave M7040]

I have a B700HSB workshop manual supplement.

See attached

Dave M7040

 

[Jim Nelson]

One thing I would mention is that when I bought my B7800 from the dealer I soon ran into something that wasn't in there. I went back to the dealer to ask about it and was told that the WSM is printed for their techs who have been through the training classes. Sounds fishy to me but something that has stuck in my mind for the 15 years since I bought it. Other than that one time I've always found what I've needed.

 

[suntreemcanic]

Thank you everyone. I can now get started on the fuel leak and the service.