3-Point Hitch Massey 1150 3PT Hitch Problem

   / Massey 1150 3PT Hitch Problem #1  

CrusherKing78

New member
Joined
May 25, 2012
Messages
2
Location
Brandon, MS
Tractor
Massey 1150
I have been restoring this tractor for the past couple of years.
After replacing the engine and getting the tractor running,
flushing the hydraulic system and replacing both filters, the 3pt
hitch wouldn"t work - no pressure. The quadrant control was
seized so I took out the whole assembly and freed it all up. I
re-installed it but the 3pt still won"t work. My power steering,
PTO, multi-power and my spools all work correctly. I am
getting about 2000 PSI at my spools. Where should I start
looking for the problem?
 
   / Massey 1150 3PT Hitch Problem #2  
Priority valve sends oil to steering and brakes first, then to three point and auxilary valves. Since everything but three point works I would look at all three point control valve linkage and spool, also check spool ocillator control. Should be able to look through cover plate at front of lift cover just under seat panel. 1150 I had would not work after sitting awhile, would work after driving on the road and hitting a few bumps and kept working if it was used weekly, would act up if it set a month or more.
 

Tractor & Equipment Auctions

2012 KENWORTH T800(INOPERABLE) (A47001)
2012 KENWORTH...
2006 Iveco F4HE9685A Turbo Diesel Industrial Engine (A45336)
2006 Iveco...
2007 Ford F-150 Pickup Truck (A45336)
2007 Ford F-150...
PALLET OF(5) 22.5 RIMS (A47001)
PALLET OF(5) 22.5...
10 YARD ROLL OFF CONTAINER (A47001)
10 YARD ROLL OFF...
2019 Bobcat T650 (A47307)
2019 Bobcat T650...
 
Top