robbie 6021
New member
- Joined
- Jun 28, 2024
- Messages
- 2
- Tractor
- massey ferguson 165
hi i have a massey ferguson 165 diesel AD4.203perkins engine is it possible to remove the oil pan with out removing the front of the tractor
massey ferguson 165
- Thread starter robbie 6021
- Start date
- Views: 1445
Dman1981
Gold Member
- Joined
- Jul 28, 2023
- Messages
- 419
- Tractor
- Kubota bx2200
Yep
OP
robbie 6021
New member
- Joined
- Jun 28, 2024
- Messages
- 2
- Tractor
- massey ferguson 165
is there a video of someone doing it
GeorgiaRebel
Member
Check YouTube and Yesterday's Tractors website for those who have documented the steps
Dman1981
Gold Member
- Joined
- Jul 28, 2023
- Messages
- 419
- Tractor
- Kubota bx2200
Support from transmission housing
Have to take weight off front end pull front support bolts. Loosen nut on stud. bottom of front cover will come with pan
So you need to take those bolts out plus two 3/8 fine nuts in front corners
Bolts that go thru pan to bell housing plus one more by pan so it slides out easier
Then pan bolts and pry off be careful and make sure you get all the front cover bolts out I think there were four if you clean it really good are easy to see
A picture is always worth a thousand words
Have to take weight off front end pull front support bolts. Loosen nut on stud. bottom of front cover will come with pan
So you need to take those bolts out plus two 3/8 fine nuts in front corners
Bolts that go thru pan to bell housing plus one more by pan so it slides out easier
Then pan bolts and pry off be careful and make sure you get all the front cover bolts out I think there were four if you clean it really good are easy to see
A picture is always worth a thousand words
