Massey Ferguson will not pull or move in gear.

[Beep383]

I bought a Massy Ferguson 1250 with 669 hours on it and was mowing the yard with a 6 ft fisinish mower and about half way through it just quit pulling no matter what gear I put it in...It seems clutch related...any ideas on what could be wrong....Thanks..

 

[Workstead]

I also have a 1250 and, while the tractor will move, especially in low gear, it doesn't have the moving power it had a few weeks ago. I'm thinking it is low on fluid but I can't locate my manual.

I'm searching these posts to see where and wheat type of fluid to put in.

 

[paulharvey]

If it is a multi range, make sure your not in-between ranges. If its just "floating" between hi and low then its basically still I'm neutral even though you are in gear.

 

[Workstead]

If it is a multi range, make sure your not in-between ranges. If its just "floating" between hi and low then its basically still I'm neutral even though you are in gear.

It will move,a little. When it gets a little speed it will move right along. When I go up hill with a load it won't move. Is there a clutch adjustment for the MF 1250 or do I have to split the tractor to make any adjustment?

Thanks for your help.

Clem