MF 135 external hydraulics

[cdupuy]

I have a diesel MF 135 with no remote hydraulics. I would like to be able to operate a cylinder on a hydraulic box blade. this seems like a light load for hydraulics vs. a front end loader.

my question is, will someone recommend a vendor for the conversion kit? the kits i have seen on the internet look like the replace the cover in the pictures I have attached.

thanks, Carr

 

[SkyePN]

It looks like Yesterdays Tractors sells a few kits, search the 135 hydraulics page for "remote"

Massey Ferguson 135 Parts - Hydraulic System Parts

Massey Ferguson 135 Hydraulic System Parts for sale at discount prices. Same-day shipping and easy returns. Compare our prices! We have the right parts for your old tractor.

www.yesterdaystractors.com

No experience with it but I've been meaning to buy one as well for a log splitter so let us know how it goes.

 

[cdupuy]

Skye, i will let you know. thanks

 

[Sportsman762]

The massey 135 has a 4.5 gpm pump. Most splitters have a 20-35 gpm pump. That is going to be a darned slow split. I know that using the 3pt splitter with 10 GPM is slow.

No experience with it but I've been meaning to buy one as well for a log splitter so let us know how it goes.

 

[cdupuy]

Thanks Sportsman762, would you say 4.5 gpm is good enough for a hydraulic cylinder on a box blade?

thank you!

 

[SkyePN]

Thanks for the tip

 

[cdupuy]

It looks like Yesterdays Tractors sells a few kits, search the 135 hydraulics page for "remote"

Massey Ferguson 135 Parts - Hydraulic System Parts

Massey Ferguson 135 Hydraulic System Parts for sale at discount prices. Same-day shipping and easy returns. Compare our prices! We have the right parts for your old tractor.

www.yesterdaystractors.com

No experience with it but I've been meaning to buy one as well for a log splitter so let us know how it goes.

I installed this kit from spare parts holland- an ebay vendor.

easy to install. only problem or concern is the pick up tube came out when I removed the original cap. I think i have it all back together now. However, I have not been able to test it since my new drag box blade has not arrived. thanks