MF 200 Industrial Shuttle Shift problems

   / MF 200 Industrial Shuttle Shift problems #1  

dmhebel

New member
Joined
Jul 9, 2018
Messages
3
Tractor
Massey Ferguson 200
Hi,

I have a MF 200 that we have had since new. Its equipped with the forward / reverse shuttle shift pedals, and a high / low two speed transmission. Recently decided to change the very brown transmission fluid. Drained from both plugs, ran a little bit to clear the pump. Added Tractor Supply fluid that said it was compatible with the spec fluid number (Don't have this number with me right now). When I first changed the fluid, the tractor would only move in reverse. After sitting over night, it would move forward / backwards fine. Took it for a test mow, and ran fine for about 30 minutes. Then it would start to slow down and then seem to 'catch' and then move again. Eventually it stopped all together, and had to let it sit overnight. Next day it was fine, although it did slow down a few times back to the shop. Its almost like air is getting in the pump, or its cavitating or something. Any ideas? Bad tranny oil?

Thanks ---
 
   / MF 200 Industrial Shuttle Shift problems
  • Thread Starter
#2  
This should have said MF 2200 industrial, it has a 200 loader. Thanks,
 
   / MF 200 Industrial Shuttle Shift problems #3  
Sounds like there is not enough oil in it. Have you checked the oil level in the correct manner?
 

Tractor & Equipment Auctions

2000 KENWORTH W900L MID-ROOF SLEEPER TRI-AXLE TRUCK (A55745)
2000 KENWORTH...
70pc. 12ft.x 3ft. Black Metal Roof Panels (A53424)
70pc. 12ft.x 3ft...
2012 POLAR TANK TRAILER TRANSPORT TRAILER (A55745)
2012 POLAR TANK...
Towable Sign Board (A55851)
Towable Sign Board...
2011 Ram 1500 4x4 Crew Cab Pickup Truck (A53422)
2011 Ram 1500 4x4...
2006 V.E. ENTERPRISES 130 BBL STEEL VACUUM TRAILER (A55745)
2006 V.E...
 
Top