Jan 15, 2015 / MF 35 half shaft collars #1 R rogert5 New member Joined Jan 15, 2015 Messages 4 Location sussex Tractor MF 35 Hi all could anyone tell me the correct way to remove the half shaft collars so I can get to the outer seals on my MF 35? Thank you if you can help. Roger.
Hi all could anyone tell me the correct way to remove the half shaft collars so I can get to the outer seals on my MF 35? Thank you if you can help. Roger.
Jan 16, 2015 / MF 35 half shaft collars #2 S SIMassey Silver Member Joined Mar 7, 2013 Messages 245 Location Heaven on earth Tractor MF rogert5 said: Hi all could anyone tell me the correct way to remove the half shaft collars so I can get to the outer seals on my MF 35? Thank you if you can help. Roger. Click to expand... Not sure what you mean by half shaft collars.
rogert5 said: Hi all could anyone tell me the correct way to remove the half shaft collars so I can get to the outer seals on my MF 35? Thank you if you can help. Roger. Click to expand... Not sure what you mean by half shaft collars.
Jan 16, 2015 / MF 35 half shaft collars #3 M mddorange Elite Member Joined Jul 16, 2014 Messages 3,357 Location Guin, AL Tractor 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger :welcome: To the forum from Northwest Alabama.
Jan 17, 2015 / MF 35 half shaft collars Thread Starter #4 OP R rogert5 New member Joined Jan 15, 2015 Messages 4 Location sussex Tractor MF 35 SIMassey said: Not sure what you mean by half shaft collars. Click to expand... The collars sit on the halfshaft, inside, next to the bearing.
SIMassey said: Not sure what you mean by half shaft collars. Click to expand... The collars sit on the halfshaft, inside, next to the bearing.
Jan 18, 2015 / MF 35 half shaft collars Thread Starter #5 OP R rogert5 New member Joined Jan 15, 2015 Messages 4 Location sussex Tractor MF 35 mddorange said: :welcome: To the forum from Northwest Alabama. Click to expand... Thank you, from a frosty Sussex..UK.
mddorange said: :welcome: To the forum from Northwest Alabama. Click to expand... Thank you, from a frosty Sussex..UK.
Jan 22, 2015 / MF 35 half shaft collars #6 M MFIHCAT Member Joined May 10, 2014 Messages 44 Location Kovar, Texas Tractor MF 383, IH 444, MF 50C, CAT D69U B Farmall 3010 Kubota among others Press them off.
Jan 23, 2015 / MF 35 half shaft collars #7 D Dieseltech Silver Member Joined Mar 20, 2012 Messages 236 Location Akron, IN Tractor MF 85 diesel, TO 35 diesel, 165 diesel, IH Hydro 84 diesel, MF Super 90 diesel puller, Agri Power 7000, 8000, and 9000 diesels, MF 205 diesel I use a SHARP air chisel to expand the old collars, then press off the bearing and collar together
Feb 15, 2015 / MF 35 half shaft collars Thread Starter #8 OP R rogert5 New member Joined Jan 15, 2015 Messages 4 Location sussex Tractor MF 35 Dieseltech said: I use a SHARP air chisel to expand the old collars, then press off the bearing and collar together Click to expand... Thank you. Job's done. Split the collars easily but had to make up a thick plate to hold the bearing housing safely as there was not enough showing to press against.
Dieseltech said: I use a SHARP air chisel to expand the old collars, then press off the bearing and collar together Click to expand... Thank you. Job's done. Split the collars easily but had to make up a thick plate to hold the bearing housing safely as there was not enough showing to press against.
