djsbuzzz
New member
I was digging the other day.With GC2310 and I lost hydrulic any I deas?
Backhoe MF GC2310
- Thread starter djsbuzzz
- Start date
- Views: 1719
jonnyc1999
Silver Member
Did you bump one of the hydrostatic levers? I seem to remember that happening to my dad's GC2300 when one of the levers was partially bumped. Can't remember which one...
buckwheat
Member
I find that if I leave the three point lift arms in full droop mode (lowered all the way) but something prevents them from achieving full drop, none of the other hydraulics work. Most commonly for me, the arms get caught on some portion of the backhoe.
Option 2 is that the hydraulic pump sheared its teeth.
Option 3 is a loss of hydraulic fluid from a leak. If you don't have a hydro filter guard, that's the first place I'd look. A chafed hydraulic hose is another possibility.
Option 2 is that the hydraulic pump sheared its teeth.
Option 3 is a loss of hydraulic fluid from a leak. If you don't have a hydro filter guard, that's the first place I'd look. A chafed hydraulic hose is another possibility.
800le
New member
if you bump your deck lift lever from its neutral position , it will stall out your backhole.'
my lever sticks and doesn,t return to neutral ,
by itself.
took me 2 hrs to figure that out.
just make sure its in the neutral position .
my lever sticks and doesn,t return to neutral ,
by itself.
took me 2 hrs to figure that out.
just make sure its in the neutral position .
