3-Point Hitch MF135 3-point hitch

   / MF135 3-point hitch #1  

Tyler79

New member
Joined
Oct 19, 2008
Messages
4
Hi, I just aquired an old 135, it sat for at least 18 years, and amazingly, it fired off and ran on the very first crank! Short of barring it over and moving all the shifters and handles, we didn't do a thing to it. The only thing that doesn't work is the 3 point hitch. The controls weren't seized, and they all move fairly smoothly. Is there anything that could have/usually does freeze up on the inside that should be checked? Thanks.
 
   / MF135 3-point hitch #2  
135 can be a bit different to some other types if you are not used to them. You maybe need to be a bit more specific about your problem then one of the extremely knowegable folk on here will surely help.
As a starter this basic manual is available online -http://lisalizard.orconhosting.net.nz/fergie/pdf/mf130-180aux-hydraulics.pdf

Hope you checked the oil level:eek:
 

Tractor & Equipment Auctions

2019 Thunder Creek MTT920 Gray 900 Gallon Fuel Trailer (A45336)
2019 Thunder Creek...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A48561)
80in HD Tooth...
8' Container w/Side Door & Window (A47307)
8' Container...
2014 VOLVO TRUCK VN SERIES (A47001)
2014 VOLVO TRUCK...
New Wolverine 72'' Skid Steer Grapple Bucket (A48289)
New Wolverine 72''...
STIHL TS420 CUTQUICK SAW (A47001)
STIHL TS420...
 
Top