Mirrors for JD 4200

   / Mirrors for JD 4200
  • Thread Starter
#11  
Fortunately I don't have tree branches to worry about. Nothing but tumbleweeds, claycrete dust and the occasional trampoline spring because some fool didn't anchor their tramp to the ground in a high wind area.

We've had two trampolines bounce through the neighborhood in the past year. The last time I mowed weeds, I picked up 11 springs lying on the ground.
 
   / Mirrors for JD 4200 #12  
I put these same mirrors on my Tractor also. They were great. My problem was they broke off at the mirror swivel point. It was like some sort of white metal stud. I intend to drill it out, tap, and put allen head rounded off on lathe back in its place.
 

Attachments

  • 16704mirror_2-med.jpg
    16704mirror_2-med.jpg
    56.4 KB · Views: 302
   / Mirrors for JD 4200 #13  
These also swivel in out of the way. I need to get them redone, I really miss having them to use. John
 

Attachments

  • 16704mirror3-med.jpg
    16704mirror3-med.jpg
    63.5 KB · Views: 231
  • 16704Mirror_1-med.jpg
    16704Mirror_1-med.jpg
    60.4 KB · Views: 194
  • 16704mirror_2-med.jpg
    16704mirror_2-med.jpg
    56.4 KB · Views: 211
   / Mirrors for JD 4200 #14  
mjncad,

Nice job on the mirrors! My neck is always hurting from looking back while using the box blade. Your place sounds similar to mine (between Falcon and Black Forest, near Colorado Springs).
 
   / Mirrors for JD 4200
  • Thread Starter
#15  
jwnge said:
These also swivel in out of the way. I need to get them redone, I really miss having them to use. John

Nice mirror installation on the loader supports. I thought of doing that type of installation with mine; but in my case it would have blocked off a grease fitting access hole.

Sounds like the white metal you describe is what I call Chinese Alumasteel. It may technically be steel; but it's so soft it may as well be aluminum, or old fashioned pot metal that car trim used to be made from.
 
   / Mirrors for JD 4200
  • Thread Starter
#16  
horseman1 said:
mjncad,

Nice job on the mirrors! My neck is always hurting from looking back while using the box blade. Your place sounds similar to mine (between Falcon and Black Forest, near Colorado Springs).

Thanks! The mirrors are a great help. They don't eliminate the twist; but they reduce it significantly. I also like using them when I'm mowing near the neighbor's fence as there is less chance of whacking a fence post.

I haven't been in that area of Colorado in quite a while; but as I recall, it is similar enough to the Adams/Weld County areas before the terrain rises into the hilly Black Forest country.
 

Tractor & Equipment Auctions

Hyster H155XL Forklift (A48837)
Hyster H155XL...
2013 PETERBILT 367 DAY CAB (INOPERABLE) (A50854)
2013 PETERBILT 367...
GENERAC GP6500 GENERATOR (A50854)
GENERAC GP6500...
2017 Ram 4500 Bucket Truck (A51039)
2017 Ram 4500...
Adams Conveyor (A51039)
Adams Conveyor...
2014 John Deere 8360R MFWD Tractor (A50657)
2014 John Deere...
 
Top