Mirrors

[tdenny]

OK,

Thanks to Mark in NH for his ideas on rear view mirrors. I promised I'd post some pics so here goes. I revised my setup a bit but the idea was basically the same as Marks. Using galvanized pipe to make little brackets, paint it, hang the mirrors, and off we go. Only one knuckle torn up. /forums/images/graemlins/blush.gif

I went with the 5" mirrors instead of the 6" (that's all I could find and I hate waiting).

Here is what they look like from the Front front

Another from the Side

Here's a Closeup of one

Closeup from Inside

and Looking Rearward

I had fun with this and they work well. Vibration is minimal except for on more bumpy ground.

 

[Inspector507]

Looks good..........!!!

 

[tdenny]

Thanks Inspector but really I take no credit here - didn't they say, "Plagerism is the sincerest form of flattery" or something like that. /forums/images/graemlins/tongue.gif

 

[Anonymous Poster]

Looks good..........!!!

There you go! I think I just flatter two with one shot!!! /forums/images/graemlins/grin.gif

 

[Mark_in_NH]

tdenny,
All I can say is Excellent job !!!!!!
I like the 2 individual mountings over the long cross rail that I used. Yours has a much cleaner look to it. The two pipe brackets that you bolted to the canopy are rather interesting looking. Are they a standard hardware store item ?
I am actually going to modify mine so as to tie the forward lights and mirrors together on the same mounting system.
Again. Excellent job. /forums/images/graemlins/smile.gif /forums/images/graemlins/laugh.gif /forums/images/graemlins/grin.gif

 

[JDGREEN4ME]

Looks Great! /forums/images/graemlins/grin.gif

 

[Inspector507]

Nothing much better than a positive comment from the one that was plagiarized..... /forums/images/graemlins/grin.gif

 

[tdenny]

Mark,

Thanks much for your help here - the brackets that I mounted on the inside of the canopy were just put there to give more support to the canopy. They are the same as the ones that are used to actually hold the bracket on the front. I couldn't find any stand-off brackets like you used. I had to improvise so I thought this might be the simplest way since the matching brackets on the front had holes in the exact same spot......

Good thinking of using your nice long bracket for adding more lights. Didn't think of that.

-Todd-

Now I'll just wait and hang out for the next good idea to come along /forums/images/graemlins/grin.gif

 

[tdenny]

Mark,

Sorry I forgot to answer your question about the pipe brackets. Yes they are very much standard at hardware stores in my area. I've used the same type of setup to build handrails for the stairs to my kids treehouse.

 

[Mark_in_NH]

TD,
There's nothing better than one person coming up with an idea and then another person taking it to the next level.
Person # 2 and so on, always seem to find little ways to improve on person #1's idea. You have done just that. /forums/images/graemlins/smile.gif
As I said before, Your individual mountings are superior to my cross rail idea. I think !! They look cleaner, and more of an OEM style design. I Like It !! /forums/images/graemlins/smile.gif

As of this afternoon, I have completly removed my mirrors and mounting brackets. My forward facing lights have arrived and I have been doing some initial playing / assembly, on just how to mount them and how I Want to mount them.
I have had the mounting brackets made for several days and need to do some fine tuning.
I am not sure just yet if I am ready to post pictures of them, but stay tuned to my Auxiliary Light Project thread for an update.