I have the 2520 with loader and backhoe. How difficult would it be to add a MMM to this? I found a good deal on a barely used MMM , would I have to reroute the hydraulics at the dealership, or is this something I can do. Any kits out there to hook it up manually?
MMM question 2520
- Thread starter xlatin
- Start date
- Views: 1557
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,566
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Do you already have the midmount PTO for the belly mower?
kennyd
Advertiser
Welcome to TBN
The MMM can be added with the proper hardware/brackets. Not sure what hydraulic lines you are referring to?
kennyd
Advertiser
Mid-PTO is standard on the 2520.
JohnnyD2320
New member
Hi, You may want to check threads for 07 or 08. I have the 2320 set up that way and one of the reasons we went with the 2320 is because some issue with the backhoe bracketry and the mid mount mower. It seems that someone found the issue.
My backhoe frame slides right off. The only thing attached to the tractor are brackets below the steps. Not sure how the 2520 backhoe attaches.
It's been a while so check it out. I would hate to see you purchase something you can't use without modification to the tractor. Maybe there is a work around.
My backhoe frame slides right off. The only thing attached to the tractor are brackets below the steps. Not sure how the 2520 backhoe attaches.
It's been a while so check it out. I would hate to see you purchase something you can't use without modification to the tractor. Maybe there is a work around.
