Modified My Quick Hitch

   / Modified My Quick Hitch
  • Thread Starter
#11  
Similar issue on my Peruzzo flail. If I leave the toplink in float & the 3pt lifts the PTO shaft can rub. Thought about a similar solution myself. I tend to run heavy gear, so am rather concerned about strength.
Raising the pin location on the implement might be easier and won't have any effect on the hitch. I didn't think of that approach before I went this way.
 
   / Modified My Quick Hitch #12  
The cross beam of the quick hitch was interfering with the PTO shaft angle with my snow blower so I am using Pat's Quick Hitch instead.
 

Tractor & Equipment Auctions

UNUSED Galvanized Wire Rope with G70 Hooks (A50860)
UNUSED Galvanized...
2018 Toro Sand Pro Bunker Rake with Edger/Broom (A49461)
2018 Toro Sand Pro...
2015 GEM e4 Electric Golf Cart (A48082)
2015 GEM e4...
2005 Ford F-450 IMT 2020 J370729 5,000LB Crane Service Truck (A48081)
2005 Ford F-450...
2016 Kia Cadenza Sedan (A48082)
2016 Kia Cadenza...
2008 Ford Escape XLT SUV (A48082)
2008 Ford Escape...
 
Top