Modify Bottom Plow for SCUT?

   / Modify Bottom Plow for SCUT? #21  
Funny how 3pt items mount, I have almost the opposite problem with a rotary mower, lifts high, but just barely goes low enough. I quess implements and tractor 3pts are not as universal as they tell us.
 
   / Modify Bottom Plow for SCUT?
  • Thread Starter
#23  
Since I am a visual learner, thought I'd throw in a fairly good video on how to set up and use the plow. It will give you some idea about what the gentlmen are trying to explain.

Leinbach 19-12 Bottom Plow, 3pt. Hitch Gardening, EverythingAttachments.com

That's funny - because that's the video I found on how to setup the plow.

For me, my lift arms are at full height to raise it above the ground. The video said they should be below horizontal. However, it didn't seem to effect the plowing any.

More important, was how they talked about the cutting edge needed to have full contact, and the plow leaning a little, but not too much forward. Most importantly, they also explained why.
 

Tractor & Equipment Auctions

2019 RBR Venturi 380 (A50397)
2019 RBR Venturi...
250 Gallons of Aluminum Brightener Concentrate (A48837)
250 Gallons of...
2005 OTTAWA T2 YARD SPOTTER (A50505)
2005 OTTAWA T2...
New/Unused 20ft Farm Metal Driveway Gate (A48837)
New/Unused 20ft...
2014 Kenworth T400 T/A Vactor 2112P-16 Combination Sewer Jetter Vacuum Truck (A48081)
2014 Kenworth T400...
40ft High Cube Shipping Container (A48837)
40ft High Cube...
 
Top