Modular Controls

   / Modular Controls #1  

Mark_in_NH

Veteran Member
Joined
Mar 4, 2002
Messages
1,554
Location
Moultonborough, New Hampshire
Tractor
New Holland TC35D w/ 16LA FEL
Can you guys help me out with the functions of this control. As you will see from the following pictures it is of course plumbed into the hydraulic system.
Two of the lines comming out of it run forward and feed the power steering.
2 more lines run over to the loader valve control and a 5th line runs into the housing under the seat.
Now, as you can see there are still 2 ports on this control that are not being used. May they can't be used !!!?????!!!
And then maybe these 2 ports can be used to help me add power angle to my snow plow blade. I really have No Knowledge of rear remotes. Is this considered a rear remote or is it just and strictly a part of the power steering system ??
 

Attachments

  • 37-225007-P1110001copy.jpg
    37-225007-P1110001copy.jpg
    83 KB · Views: 249
   / Modular Controls #7  
The top cap looks like a pressure
relief adjustment.
The 2 lines that go to the loader are what
u need to tap into for remote.
Take one of the lines from loader valve and
reroute (hydraulic hose) thru your new valve
for remote then back to the modular control.
U will need an open center valve for this.
Which ever valve u want to have priority(sp?)
will be the first one to get flow from modular
control.
So if u want loader to have priority install remote
in return line from loader.
 

Tractor & Equipment Auctions

80in HD Tooth Bucket with Side Cutters ONE PER LOT (A50397)
80in HD Tooth...
2008 John Deere 9570 STS Combine - Front Duals - Premium Cab - 1,704 Sep Hours - Clean & Field-Re... (A50397)
2008 John Deere...
2016 Ford F-450 Knapheide Service Truck with Liftgate (A48081)
2016 Ford F-450...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
NEW 2024 LOAD TRAIL 83IN X 20FT Tandem Axle Equipment Trailer (A50397)
NEW 2024 LOAD...
2007 Mack CTP713 Granite T/A Roll Off Truck (A48081)
2007 Mack CTP713...
 
Top