Mortar Mixer and Concrete Mixer RPMs

   / Mortar Mixer and Concrete Mixer RPMs #1  

Pooh_Bear

Platinum Member
Joined
Jan 2, 2005
Messages
763
Location
Dunlap TN 25 miles north of Chattanooga
Tractor
Early 1949 Ford 8N
I'm thinking of building a small concrete mixer
and building a small mortar mixer.
I used to own a concrete mixer but sold it.
Didn't think I would ever have use for one again.

How fast does a concrete mixer turn (RPMs).

How fast do the paddles in a mortar mixer turn (RPMs).

I can't afford to buy these items.
But I'm good at scrounging up materials.
And I thought it would be fun to see if I could make them.
I got lots of pullys and axels and bearings and electric motors.
I just need to make the structures. And get the RPMs correct.

Pooh Bear
 
   / Mortar Mixer and Concrete Mixer RPMs
  • Thread Starter
#2  
I'm thinking of building a small concrete mixer
and building a small mortar mixer.
I used to own a concrete mixer but sold it.
Didn't think I would ever have use for one again.

How fast does a concrete mixer turn (RPMs).

How fast do the paddles in a mortar mixer turn (RPMs).

I can't afford to buy these items.
But I'm good at scrounging up materials.
And I thought it would be fun to see if I could make them.
I got lots of pullys and axels and bearings and electric motors.
I just need to make the structures. And get the RPMs correct.

Pooh Bear
 
   / Mortar Mixer and Concrete Mixer RPMs #3  
PB, I just got though mixing 80 bags of concrete and it seems like it was doing about 10RPM. This one is advertised at doing 31RPM.
 
   / Mortar Mixer and Concrete Mixer RPMs #4  
PB, I just got though mixing 80 bags of concrete and it seems like it was doing about 10RPM. This one is advertised at doing 31RPM.
 
   / Mortar Mixer and Concrete Mixer RPMs #5  
Hi
have a look at these plans, web page Might be just what you're looking for.

charlie
 
   / Mortar Mixer and Concrete Mixer RPMs #6  
Hi
have a look at these plans, web page Might be just what you're looking for.

charlie
 
   / Mortar Mixer and Concrete Mixer RPMs
  • Thread Starter
#7  
Cool. Thanks for that link.
That looks like something I could definitely do.
Even scale it up a bit to make a bigger batch.

Any idea for plans for a mortar mixer?

Thanks.

Pooh Bear
 
   / Mortar Mixer and Concrete Mixer RPMs
  • Thread Starter
#8  
Cool. Thanks for that link.
That looks like something I could definitely do.
Even scale it up a bit to make a bigger batch.

Any idea for plans for a mortar mixer?

Thanks.

Pooh Bear
 
   / Mortar Mixer and Concrete Mixer RPMs #9  
Hi
Something like this might be good, looks like it would be easy to construct with a few parts from the project box.

charlie.
 

Attachments

  • 885436-MixersPxpail.jpg
    885436-MixersPxpail.jpg
    10.2 KB · Views: 399
   / Mortar Mixer and Concrete Mixer RPMs #10  
Hi
Something like this might be good, looks like it would be easy to construct with a few parts from the project box.

charlie.
 

Tractor & Equipment Auctions

(1) HD 24ft Free Standing Corral Panel (A51573)
(1) HD 24ft Free...
2018 JOHN DEERE 50G EXCAVATOR (A51246)
2018 JOHN DEERE...
New Wolverine 3pt Receiver Hitch (A53002)
New Wolverine 3pt...
1999 KENWORTH W900 TANDEM AXLE SLEEPER (A52576)
1999 KENWORTH W900...
2017 Makita HM1307CB 35lb Demolition Hammer (A52377)
2017 Makita...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top