Mowing Mowing, how fast?

   / Mowing, how fast? #11  
Ok, I know that this is another almost impossible question to answer because of all of the variables that come into play, but here goes anyway.

How fast should a person be mowing assuming a tractor/shredder combination that is sized correctly, flat ground with no obstructions and mowing for optimum quality of cut.

I have a TN70D (57 pto hp) with a 7' rhino rotary mower. One 30 acre field I mowed two years ago I was running 6mph and getting a nice cut. Weeds were not thick but were about 3' high. A week ago I mowed 8 acres, again not thick but about 2' high with 1/4-3/8" mesquite running 4.3mph and got a nice cut. In both cases the fields were nice and flat and large enough that there wasn't much backing up or other wasted time. Both were fields that had been cultivated within 5 years or so, so there were no obstructions, rocks or trash to mow around.

Tim
You can go 8-10 mph before you overun the cutting edges on the blades at full ptorpm. For optimum quality of cut use 1st gear and slip the clutch.;) ... I usually go 6-7 mph unless its pretty thick.
larry
 

Tractor & Equipment Auctions

2015 CHEVROLET CAPRICE POLICE CAR (A51222)
2015 CHEVROLET...
12 FLATBED W/ PRESSURE WASHER FRAME (A50854)
12 FLATBED W/...
2014 KENWORTH W900 MID-ROOF SLEEPER (A50854)
2014 KENWORTH W900...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
Marliss Industries Grain and Soybean Drill - Selling ABSOLUTE NO RESERVE (A51039)
Marliss Industries...
2013 VOLVO VNM DAY CAB (A51222)
2013 VOLVO VNM DAY...
 
Top