sweettractors
Advertiser
Just down the road from the Shipping Facility of Sweet Farm Equipment LLC in Canmer, Ky is a great Muddin spot on Green River. Got hills, trails, rivers, springs and creeks. Ken Sweet
You mean, like get the RTV dirty????:thumbdown: :cool2:
Years ago we use to go Mud Boggin in some old phosphate pits in Florida. Sometimes there would be close to a hundred vehicles showing up on the weekend. It was a good way for the locals to spend the day. We would cook and BBQ, drink beer and socialize. Your post brought back many memories. Thanks for posting.
I have been known to do a little mud slinging myself. My style.
View attachment 293310View attachment 293311View attachment 293312View attachment 293313
Well…. It’s a 97 Ford Ranger body and chassis but from there it’s pretty much all custom built. It has a Dana 44 front axle and a 9 in Ford under the rear. A highly modified C6 trans with reverse valve body and trans brake. The stall is a 8 in 6,500 RPM and we use a 208 aluminum transfer case. We have different tire combo's but usually in the deep mud I run 38 cuts up front and 39.5 cuts on the rear. The engine is currently a 557 cid BBF we custom built (it’s not a create motor) with a lot of extras aluminum parts. I plan on moving up to something in the 632 + range with a power glide but haven’t just yet.
I included a picture of the 557 so you can see some of the “slight” modifications..
View attachment 293339