Price Check MX5200 price check

[cooljoe00]

I got a dealer price(quote), this is finance 0%. I just want feedback on people's thoughts on the pricing.

MX5200HST w/R4 Tires, 1 rear float valve/Fib Canopy ~$26,450
LA1065 FEL MX5200 ~$6,000
BH92 W/sub frame 16" bucket ~$9,100
OBG2-72 Grapple ~$3,500
BB2572 Box Blade ~ $1,300
RCR1872 Rotary Cutter ~$2,300
Discount ??? ~-$1,000
Total ~$47,650

 

[scdeerslayer]

What about 3rd function? You'll need that for the grapple.

If you can think of any possible future need for more than 1 rear remote then get all three now. It will be a lot cheaper now.

 

[bspeedy]

My thoughts on the pricing... HOLY &^%$!!!!

I'm sure new is nice, but... A used MX HST with loader with a couple hundred hours goes for low 20's around here. That's a 10 grand savings from new. Take that 10 grand, add it to your 9100 for the backhoe and buy an awesome used mini excavator which will dig CIRCLES around a tractor mounted backhoe. And you'll never have to worry about mounting and dis-mounting the tractor backhoe again.

3500 for a grapple is nuts. Must be super HD. Make sure your tractor requires such heft. I'd think closer to 1500 for a very good grapple. I've never used a 1300 dollar box blade. Get one of those second hand for 7 or 800 - max. 2300 for a 6-foot cutter? Half that will buy an excellent bush hog or woods cutter. It's going to get beaten to death anyway.

It's your money - obviously - so spend it how you like. 50 large buys a whole shop full of toys, not just a tractor.

I know people will say to buy new and get the financing, but I just don't see spending thousands more for new. And then again, maybe I'm just a cheap-azz :laughing:

 

[bspeedy]

I hope I'm not being a killjoy with my comments above. If a new tractor is what you really want, go for it. I think with the MX series you can't go wrong.

 

[FatTire]

I understand why people buy new -- you pay extra but you minimize risk of dealing with somebody else's problem.

Regarding the quote, does the $9100 for the BH92 include one bucket? If so that is a good deal.

 

[sea2summit]

That's a steal.

 

[aarolar]

I like the price on the tractor and loader but in your shoes I'd not buy all those impliments new like that, a lot of money could be saved buying lightly used stuff.

 

[cooljoe00]

Some where in those totals is the 3rd function and the backhoe bucket. If I could finance the used implements in with the tractor I would but I am trying to not put out a lot of cash out front.

 

[FatTire]

Some where in those totals is the 3rd function and the backhoe bucket. If I could finance the used implements in with the tractor I would but I am trying to not put out a lot of cash out front.

So I am not an expert on pricing, but with 3rd function in thrown in there I think they've given you a competitive quote. Are you sure you don't want a 2nd rear remote? With 2 rears and 3rd function you'd probably never have to mess with your hydraulics again.

 

[KNOWITALL]

RCR1872 ... guy is trying to make $500 on the cutter. You can honestly get a 5660SUHD for cheaper. Shop around that guy is trying to hit a home run on you

 

[Spud68]

I Just bought a WR long RBG2 root grapple and some Honest feedback is I would not recommend it with the tractor you are looking at. I have already broken a couple of the teeth off it, along with some weakening welds. A significant design flaw with the center section of the grapple also allows sticks and debri to hit the quick connect levers and possibly unhook the grapple. I paid $2200 for my RBG2 60. I wish I had gone with the everything atachments grapple it looks much better designed and stronger. Live and learn. Oh BTW I paid $33K for my MX5200 with front loader, RSC1872 cutter and 10K lb equipment trailer. Probably not the best deal but 0% interest helped.

Teddy

 

[JOHNTHOMAS]

Barlows showed me a MX5800 yesterday with 17 hours FEL, Tiller and Bush hog rotary mower for around $30,000. I don't want one that big so going for a L3901 HST FEL front hydraulics loaded tires Landpride 6' rotary mower and trading in my B2650 HST FEL front hydraulics with under 50 hours.
.

 

[TripleR]

John, what are you going to be using your new tractor on?

 

[JOHNTHOMAS]

John, what are you going to be using your new tractor on?

I bought the 25 acres of mountain behind me. Was logged about 15-20 years ago and then a transmitting tower was installed on the top for 10 years and recently removed, site leveled and grass seeded. The road to top/ex tower site is graveled with solid base and then the road//trail/old logging road circles around to my house with grown up old logging roads going off the one I've been keeping mowed. I've got a track loader coming in a month or so to cut more cross trails. I believe in paying experienced excavators to do side hill excavating and then me do the detail cutting/mowing/clean up. I needed more weight than the B2650 and Barlow cut me another deal along with taking my excess ZD326 (sold rental property I mowed) along with my B2650. I also was "forced" to buy the six building lots across the street from me in order to buy the 25 acres. Didn't want lots but will probably make some money off them and keep 2 or 3 directly across the street from my house for a garden. Will need to mow them until sold or if I don't sell them and reason I needed/wanted the 6' Rotary mower. I have a Hydraulic front mount post hole digger and will be buying a grapple so needed front hydraulics but can't see any forseeable need for rear hydraulics but can always add them if I do.
Short question brought a long answer. :laughing::cool2:

 

[TripleR]

John you are really enjoy your new tractor/equipment on your increased acreage. The new L Series i a real improvement over the old ones.

I'm a big believer in knowing when to DIY and when to have it done. We are renting an excavator a couple of times this summer. My son and brother will be operating it, I'll just watch on this one.

 

[innrkid]

I'm no expert, however, that looks really high. Have you gone to the Kubota site and priced all of that? 1000 discount looks like the 500/500 program that's running.
I also agree with others on used vs new where possible.
It sounds like a great set up and no matter which way you go, you will probably enjoy the tractor immensley. Good luck.

 

[LD1]

Late to the party, but agree to buy the implements separate. The 1872 rotary cutter is too light IMO unless you are just clipping pasture grass several times a year. And $3500 for a grapple for a MX.....look elsewhere.

I was just at the dealer yesterday getting outer tie-rod boots again. Saw a new M5660. Man I sure wish they made one of them in a HST. It would be about perfect for me.

Not quite as heavy as the M6060/7060. And not as expensive either. It seems to fill the gap between the MX and the next larger M's.

M5660 vs MX5800...
Same HP
M5660 has a nicer loader with the option of putting the cylinders in height or power position. IN heght position it can lift 2' higher. In power position its about the same but alot stronger than the MX.

The 5660 has a road speed about 2.5mph quicker
The 5660 is only about 500# heavier
The 5660 can lift 3300# out back as opposed to the MX 2300#

And the real big one...It has nice large diameter front tires for a smooth ride. When I settled on my MX, I was wanting the ultimate 50-60HP bushhog machine. Most power with the least weight and largest tires were what I was after. The MX still has little 16" front rims.

Only deal breaker for the M5660 is lack of HST. If the make one that is HST, I would have been all over it.

 

[Rmart30]

Not a 5200 but a MX4800 ........geared 4x4 ag tires, FEL with QT bucket and 1 rear remote was $26,900...... RCR 2672 $2850. Is a better cutter than a 1872... All land price implements they offer 0% finance on also for 24 months. longer terms are a small interest rate on them.