Need a head for a Ford 1210

   / Need a head for a Ford 1210 #1  

Hysyde

Gold Member
Joined
Jun 2, 2002
Messages
260
Location
Eastern Ontario, Canada (South of Ottawa)
As per the thread title, anyone know of a decent source, preferably in Canada? Current head is cracked.

The tractor's in decent shape otherwise (with a loader), and I was planning on selling it and buying a new tractor (25-25 CUT or a light-commercial TLB like a B21-26). I'd hate to write it off for the sake of a few thousand dollars.
 
   / Need a head for a Ford 1210 #2  
Did you try Alexander's and southern global?
 
   / Need a head for a Ford 1210 #3  
Search for 1120, 1210, 1215, 1220, 1310. They all use the same head.
 
   / Need a head for a Ford 1210 #4  
That's a Shibaura motor ? I know of one sitting on a floor in a garage because she decided to part it out.
 
   / Need a head for a Ford 1210 #5  
   / Need a head for a Ford 1210 #6  
The part number for the head is SBA111016622. This supersedes 83941096, 83943160, SBA111016610, SBA111016611, SBA111016620, SBA111016621. It is listed as fitting the 1110, 1120, 1210, 1215, 1220, and 1310.
For looking up the parts for a CNH item I use the OEM parts books at mycnhstore.com

When looking for dismantled machines I like Tractorhouse and Fastline. Below is a link for tractorhouse and for the machines listed above.

Hope this helps.
 
Last edited:
   / Need a head for a Ford 1210 #7  
The part number for the head is SBA111016622. This supersedes 83941096, 83943160, SBA111016610, SBA111016611, SBA111016620, SBA111016621. It is listed as fitting the 1110, 1120, 1210, 1215, 1220, and 1310.

Hope this helps.
The 1110 is listed as a 2 cylinder.
I think most of the others are 3 cylinders.
Somehow Ford really played around with the HP figures quite a bit.

Perhaps time to rebore the block for the next size up?
 
   / Need a head for a Ford 1210 #8  
Essentially a Shibaura S723 or S753 diesel engine
 
   / Need a head for a Ford 1210 #9  
The 1110 is listed as a 2 cylinder.
I think most of the others are 3 cylinders.
Somehow Ford really played around with the HP figures quite a bit.

Perhaps time to rebore the block for the next size up?
Yep the darned parts book listed it in the 1110 manual with a note that it fit the 1210. Typical Ford parts books, you have to read close or they will get you.
 

Tractor & Equipment Auctions

2016 CATERPILLAR 336FL EXCAVATOR (A51246)
2016 CATERPILLAR...
2020 Kinze 3505 High Speed 6/11 Planter (A55302)
2020 Kinze 3505...
Heil V-1722 28Yd Front Loader Garbage Truck Body (A51691)
Heil V-1722 28Yd...
2018 MACK PINNACLE (A53843)
2018 MACK PINNACLE...
HAMM HD+110i SMOOTH DRUM ROLLER (A52706)
HAMM HD+110i...
2022 JOHN DEERE 330G SKID STEER (A52705)
2022 JOHN DEERE...
 
Top