gregfender
Gold Member
Where is a good place to get a replacement battery that doesn't cost an arm and a leg? TSC has Exide batteries...any reviews?
Need a new battery
- Thread starter gregfender
- Start date
- Views: 5746
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,569
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
What tractor?
Davestc29
Member
- Joined
- Apr 1, 2011
- Messages
- 41
- Location
- Homestead, Fl
- Tractor
- New Holland tc29d and L785 skid loader
I buy em at my local Napa not the Cheapest but I've had good luck with them
Bigfoot62
Veteran Member
- Joined
- Aug 5, 2008
- Messages
- 2,283
- Location
- W. Central Louisiana
- Tractor
- JD 5090M; JD 5085M; JD 5083E; NH TN70A; Ford 2600
Same here. NAPA batteries have been good for my equipment.
OP
gregfender
Gold Member
I guess that would be helpful...JD 1070
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 16,546
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
I just replaced my Deere 4400'sbattery with one from Interstate...about $82.00.
Main thing I needed was one the fit the existing clamp down locations. It's just a standard automotive battery and I hope it holds up as well as the replaced battery (which was 7 years old).
Main thing I needed was one the fit the existing clamp down locations. It's just a standard automotive battery and I hope it holds up as well as the replaced battery (which was 7 years old).
DAY
Platinum Member
Check the manual for "size"- cranking power, amps/hour, whatever. Too "small" and it can cause starter problems. My JD 850 calls for '475 amps cold cranking'.
Runner
Elite Member
- Joined
- May 12, 2007
- Messages
- 3,197
- Location
- Missouri
- Tractor
- 2024 Cub Cadet Ultima ZTXS5 54, 2007 John Deere 2520, 1989 John Deere 185, 1960 Panzer T70B
I have had good luck with the EverStart batteries from Walmart, however, couldn't find one to fit my 2520.
So, I went with an Exide from TSC, which has the correct hold-down points and the price was right (in the $90 range). I have had it in there for a couple of years, and had no problems.
So, I went with an Exide from TSC, which has the correct hold-down points and the price was right (in the $90 range). I have had it in there for a couple of years, and had no problems.
OP
gregfender
Gold Member
If my manual calls for 550CCA will it hurt to move up to one that's in the 750 to 950 CCA range?
