Need advice, 2538 HST won’t start when hot

[tncal]

I’ve got a 2538 HST cab with 460 hours. Yesterday after running several hours I turned it off and went back about 30 minutes later started cranking , turned over fine but wouldn’t start. The battery was a 3 year battery that had been in there 6 years, so went and bought a new battery just in case that was the problem. I tried to start it before changing battery and it fired right up. Got it out of yard to the garage and put new battery in anyway. This morning fired right up and had been running about an hour and stopped for a water break. I went to start it , it cranked right up, raised the bucket, turned on AC and it stopped. Now it will not start. Could there be some sort of relay , etc that is overheating, that when it cools down will crank? It’s about 90 degrees out. All gauges working, and reading normal. Any ideas would be greatly appreciated.

 

[seville009]

No knowledge myself, but just a related thread, in case it helps.

Tractor wont start hot

My Branson 2810 runs great, all the gauges and sensors are appear to work properly, no lights or indicators. However after I run it for about 30 minutes it refuses to start until I let it sit for about 30-40 minutes. When I turn the ignition it just turns over and over with no sign of it even...

www.tractorbynet.com