Need Extra Long cat 1 Lift (Draw) Pins

[Kioti Tom]

the difference the spacer does is to take the 26" Cat one spacing to a Cat two spacing of approx. 32". Remove the spacers and you should be back at 26".

 

[LD1]

That tubing sure didn't look that thick.

I am afraid I can help. Other than just. browsing the web hoping to find something.

 

[corey9212]

I'm not sure if you are still looking for advice but like was mentioned earlier you could convert your hitch to cat 2 for the mower and use bushings on your cat 1 implements to use them on your new cat 2 hitch.
I am using cat 1 implements on a cat 3 hitch and it's worked out great, I ended up spot welding the bushings on the pins and makes hooking up easy.

 

[Guesseral]

Just get the short ones and put the nut inside of the tube that should make it reach.


Edit:

Nope guess that won't work either never saw the brace on the other side! How about putting the nut on the inside, and then get a bolt and nut for the other side and put that nut inside also. or Can you weld? Weld a longer threaded end on, is the only other thing I can think of.