Need Help Please!
- Thread starter tbclmc
- Start date
- Views: 947
jenkinsph
Super Star Member
I think you will need to be more specific as to what problem you are having.
Steve
Steve
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Deffinately neeed more info.
most 3pt augers have a long bar connection in place of the toplink.. then the 2 lower links.. then the pto shaft.
since the 8n doesn't have live hyds.. you will need to leave the pto shaft disconnected till you lift the 3pt, then shut her down, connect the pto shaft.. then go.
soundguy
most 3pt augers have a long bar connection in place of the toplink.. then the 2 lower links.. then the pto shaft.
since the 8n doesn't have live hyds.. you will need to leave the pto shaft disconnected till you lift the 3pt, then shut her down, connect the pto shaft.. then go.
soundguy
jmc
Elite Member
- Joined
- Jul 21, 2003
- Messages
- 3,210
- Location
- SW Indiana
- Tractor
- Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
could it be a spline compatibility issue?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
could be.. but impossible to tell with the -no info- that was given.
oem pto was 6 spline 1 1/8.. new style is 1 3/8 6 spline.. could be either. it's a 4-bolt 15 minute job to swap the shaft.. or you can use a stub / sleave converter to adapt it up.
soundguy
oem pto was 6 spline 1 1/8.. new style is 1 3/8 6 spline.. could be either. it's a 4-bolt 15 minute job to swap the shaft.. or you can use a stub / sleave converter to adapt it up.
soundguy
kthompson
Elite Member
- Joined
- Sep 12, 2008
- Messages
- 3,526
- Location
- South Carolina
- Tractor
- Kubotas B2710, M6800, L6060 cab, Volvo EC excavator, 2 ZTRs and various implements.
Don't you mean live PTO? Also does that tractor NOT have a lever to engage or disengage the PTO? My nephew had one and right sure it did. If so why must you disconnect the PTO shaft to move the tractor?
wedge40
Veteran Member
- Joined
- Oct 8, 2007
- Messages
- 2,197
8N has live PTO.. The PTO is ALWAYS on. Never heard of 8N with independent PTO. But I'm no expert. Soundguy?
Wedge
Wedge
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Yer both wrong. The 8n has NON LIVE pto.. the pto is not ALWAYS on. it's on when you engage the lever and are not on the clutch. if you step on the clutch, pto dies.
the hyds are run off the pto.. thus since the pto ain't live.. neither are the hyds.
since you need the pto running to make the hyds work, to lift the 3pt.. then you certaintly can't have the auger hooked up to the pto as the thing will start drilling while setting on the ground as soon as you let the clutch out.. it's real likely it will drill in before the lift arms pressureize and lift it up.... that's why i said hookup the 3pt components, get the lift and auger in the air.. shut the pto off, then hook the pto up to the auger.
trans pto.. non live
belly pump.. non live hyds... if pto is disengaged.. so are the hyds!
soundguy
the hyds are run off the pto.. thus since the pto ain't live.. neither are the hyds.
since you need the pto running to make the hyds work, to lift the 3pt.. then you certaintly can't have the auger hooked up to the pto as the thing will start drilling while setting on the ground as soon as you let the clutch out.. it's real likely it will drill in before the lift arms pressureize and lift it up.... that's why i said hookup the 3pt components, get the lift and auger in the air.. shut the pto off, then hook the pto up to the auger.
trans pto.. non live
belly pump.. non live hyds... if pto is disengaged.. so are the hyds!
soundguy
