Need replacement bucket for FEL

[gwdixon]

The debris forks can be made from the pallet fork attachment. Just go to a forklift repair place and get a couple of old forks that fit your QA. They should match up to skid steer dimensions. They are much less expensive than a dedicated brush fork. Sometimes under $100/pair.

With four pallet tines off the front your brush forks are right there and are easy to set up and take off.

Another choice is to buy a QA bare plate and weld hay spears to it. It is more expensive that way, by far, but you'd have what you want.

Channel iron works for the forks if you really want to go cheap.

 

[AlbionWood]

The debris forks can be made from the pallet fork attachment. Just go to a forklift repair place and get a couple of old forks that fit your QA. They should match up to skid steer dimensions. They are much less expensive than a dedicated brush fork. Sometimes under $100/pair.

With four pallet tines off the front your brush forks are right there and are easy to set up and take off

I like that idea, thanks.

Just placed the order for the QA, bucket, toothbar (after reading some threads here, very glad I added that), and pallet forks. Now lusting after a Bucket Thumb... man, if I could mount that to the forks, I'd have a brush-mover!

 

[AlbionWood]

Just placed the order for the QA, bucket, toothbar (after reading some threads here, very glad I added that), and pallet forks.

AAAARRRGH! Just received everything today, and the QA adapter does not fit! The space for the bucket cylinder tee is too narrow (2-1/8" instead of 2-1/2"). Took a month to get it, and now I'll have to send it back and wait for another one!