Need some help picking an solenoid valve

[Cord]

I'm looking to add a second accessory port to my skidsteer. I currently have one circuit that is controlled by a manual valve and I want to split it's flow. To do this, I'd like to add a solenoid selector valve that let me choose between the two circuits. For example, port A is active when the valve is off. Port B is active when the valve is on. I do not need to split the flow between the two ports at the same time. I do not need a relief and I believe I want a closed center valve. There are lots of posts on this forum for people adding a third function to their loader; the problem is flow. Your loader circuits are pretty low flow so a 10gpm valve is sufficient. Well, my pump is rated for 31gpm so I need a valve that is listed for not less than 24gpm and more certainly wouldn't hurt. I've been unlucky finding the correct valve on Fremont or Surplus Center sites. Any other suggestions?

 

[RNeumann]

This should get you exactly what you want. Hyvar is an American company and I’ve talked to a tech who was knowledgeable on the phone- seems they are good people to do business with and the product is good.

https://www.baileyhydraulics.com/pdf/Hyvair_Solenoid_Valves.pdf

 

[TractorGuy]

I just bought one of these to split the bucket curl circuit on my loader.
https://www.baileyhydraulics.com/SE...account=Revenue&custcolichartsrecordcounter=1

 

[moship]

I just bought one of these to split the bucket curl circuit on my loader.
SELECTOR VALVE SOLENOID OPERATED 12/24 VOLT DC 13.2 GPM SAE 8, DSV-62-8-12

It great this works for you, but I think the OP is looking for something that flows >=24 GPM and the one you are using is rated for 13.2 GPM (SELECTOR VALVE SOLENOID OPERATED 12/24 VOLT DC 13.2 GPM SAE 8)